HEM 260 BSA

The 260 is a double-mitering band saw cutting 45ᵒin both directions, up to 60ᵒ left miter, includes an adjustable hard-stop to cut multiple same-length parts, and has a built-in flood coolant syste...

HEM 320 BSA

The 320 BSA is a double-mitering band saw cutting 45ᵒin both directions, up to 60ᵒ left miter. The control is connected by a 40” umbilical cord and blade speed adjusts approximately 39 to 320 SFPM....

HEM 782XLH

The 782XLH is a versatile benchtop band saw and will cut in the upright position with an optional “work table”, will miter up to 45ᵒ in one direction in the horizontal position, and includes a hard...

HEM ABS-105

The ABS-105 is a benchtop band saw with the ability to cut miters up to 45ᵒ in one direction in the horizontal position. A two-speed motor powers a ¼” blade and the saw operates in semi-automatic m...

HEM ABS-NG120XL

The ABS-NG120XL will cut in manual pull-down or semi-automatic modes and can miter-cut up 60ᵒ in one direction. The ¼” blade is powered by a 1.7 HP variable speed motor, and a hard-stop for cutting...

HEM ABS-NG160

The ABS-NG160 benchtop band saw will miter-cut up to 45ᵒ in one direction. It will cut with manual pull-down or semi-automatic modes. A ½” wide blade is powered by a 2.7 HP motor and a hard-stop is...

HEM CT2000HA-DC-C

Dual Column band saw Bar-feed: 0-24″ (Multiple Index) Blade: 22’2″ x 2″ x .063″ Hydraulic Motor: 2 HP Motor: 20 HP Operation: Automatic

HEM CT2000HM-DC

Dual Column Band Saw Capacity: 20″ W x 20″ H Blade: 22’2″ x 2″ x .063″ Hydraulic Motor: 2 HP Motor: 20 HP Operation: Manual/Semi-Automatic

HEM CYCLONE A-4

The Cyclone A-4 makes cutting 45ᵒ miter cuts in one direction perfect for cutting small solids and shapes. With a 24” indexing bar-feed and up to 4 indexes, cutting multiple parts in longer than 24...

HEM CYCLONE A-C

Product Description The Cyclone A-C multiple indexes with a 24” bar-feed, saves up to 99 jobs, sawing one job or multiple jobs of differing lengths and quantities in sequence. Each job includes job...

HEM CYCLONE M

Product Description The Cyclone M miters to 60ᵒ one direction, is ideal for cutting solids and structural shapes with a 1¼” blade and 7½ HP motor. The control console, mounted on a swing arm, allow...

HEM DC-4040

Dual Column Band Saw Capacity: 40″ W x 40″ H Blade: 33’0″ x 2.625″ x .063″ Hydraulic Motor: 5 HP Motor: 30 HP Operation: Manual/Semi-Automatic 8′ Powered Base

HEM DC-4060

Dual Column Saws Capacity: 60″ W x 40″ H Blade: 37’0″ x 2.625″ x .063″ Hydraulic Motor: 5 HP Motor: 30 HP Operation: Manual/Semi-Automatic

HEM DC-5353

Dual Column Band Saw Capacity: 53″ W x 53″ H Blade: 40’0″ x 2.625″ x .063″ Hydraulic Motor: 5 HP Motor: 30 HP Operation: Manual/Semi-Automatic

HEM DC2038RB1

Dual Column Band Saw Capacity: 38″ W x 20″ H Miter: 24″ W x 20″ @ 45° Miter: 16″ W x 20″ left @ 60° Blade: 24’6″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 15 HP Operation: Manual/Semi-Automatic

HEM DC22A

The DC22A band saw operates using a touch screen control mounted in a swing-away console. A 48” servo twin ball-screw bar-feed is standard and a 120” version is optional. A full-stroking main vise ...

HEM DC22M

The DC22M band saw is operated using a touch screen that is mounted in a swing-away console. A full-stroking spilt vise that positions automatically with the powered guide arm, patented Cut Watcher...

HEM H105A-4

The H105A-4 model includes a 7½ HP motor and a 1¼” blade with a 24” stroke bar-feed that will index up to 4 times cutting up to 999 parts of the same length. This scissor style saw is perfect for c...

HEM H105A-C

The H105A-C includes a 24” bar-feed and allows multiple indexes and the ability to create and save up to 99 jobs. Each job includes a job number, the part length, and quantity and runs consecutive ...

HEM H105LA-4

Horizontal Pivot Band Saw Capacity: 20″ W x 16″ H Bar-feed: 0-24″ (4 Indexes) Blade: 15’8″ x 1.25″ x .042″ Motor: 7.5 HP Operation: Automatic

HEM H105LA-C

Horizontal Pivot Band Saw Capacity: 20″ W x 16″ H Bar-feed: 0-24″ (Multiple Index) Blade: 15’8″ x 1.25″ x .042″ Motor: 7.5 HP Operation: Automatic

HEM H105LM

Horizontal Pivot Band Saw Capacity: 20″ W x 16″ H Blade: 15’8″ x 1.25″ x .042″ Motor: 7.5 HP Operation: Manual/Semi-Automatic

HEM H105M

The H105M model includes a 7½ HP motor and a 1¼” blade and will produce straight cuts fast. This saw is perfect for cutting solids and structural shapes. Adjustable clamping pressure and accurate a...

HEM H130HA-9

Horizontal Pivot Band Saw Capacity: 20″ W x 10″ H Capacity: 16″ W x 16″ H (Square) Blade: 17’0″ x 1.5″ x .050″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Manual/Semi-Automatic

HEM H130HA-C

Horizontal Pivot Band Saw Capacity: 20″ W x 10″ H 16″ W x 16″ H (Square) Bar-feed: 0-24″ (Multiple Index) Blade: 17’0″ x 1.5″ x .050″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Automatic

HEM H130HA-DC

Dual Column Band Saw Capacity: 20″ W x 20″ H Bar-feed: 0-24″ (9 Indexes) Blade: 19’0″ x 1.5″ x .050″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Automatic

HEM H130HA-DC-C

Dual Column Band Saw Capacity: 20″ W x 20″ H Bar-feed: 0-24″ (Multiple Index) Blade: 19’0″ x 1.5″ x .050″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Automatic

HEM H130HM-1

Horizontal Pivot Band Saw Capacity: 20″ W x 10″ H 16″ W x 16″ H (Square) Blade: 17’0″ x 1.5″ x .050″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Manual/Semi-Automatic

HEM H130HM-DC

Dual Column Band Saw Capacity: 20″ W x 20″ H Blade: 19’0″ x 1.5″ x .050″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Manual/Semi-Automatic

HEM H160A-DC-C

Dual Column Band Saw Capacity: 25″ W x 25″ H Bar-feed: 0-24″ (Multiple Index) Blade: 22’0″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 20 HP Operation: Automatic

HEM H160LA-DC-C

Dual Column Band Saws Capacity: 30″ W x 25″ H Bar-feed: 0-24″ (Multiple Index) Blade: 23’0″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 20 HP Operation: Automatic

HEM H160LM-DC

Dual Column Band Saw Capacity: 30″ W x 25″ H Blade: 23’0″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 20 HP Operation: Manual/Semi-Automatic

HEM H160M-DC

Dual Column Band Saw Capacity: 25″ W x 25″ H Blade: 22’0″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 20 HP Operation: Manual/Semi-Automatic

HEM H160XLA-DC-C

Dual Column Band Saw Capacity: 36″ W x 25″ H Bar-feed: 0-24″ (Multiple Index) Blade: 24’0″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 20 HP Operation: Automatic

HEM H160XLM-DC

Dual Column Band Saw Capacity: 36″ W x 25″ H Blade: 24’0″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 20 HP Operation: Manual

HEM H260A-DC

The H260-DC band saw operates using a touch screen control mounted in a swing-away console. A 48” servo twin ball-screw bar-feed is standard and a 120” version is optional. A full-stroking main vis...

HEM H260M-DC

The H260M-DC operates using touch screen mounted in a swing-away console. The patented Cut Watcher® System and Chip Auger are standard features. A full-stroking main vise positions automatically wi...

HEM H3236A-DC

The H3236A-DC band saw operates using a touch screen control mounted in a swing-away console. A 48” servo twin ball-screw bar-feed is standard. Jobs are created and stored for later recall. The pat...

HEM H3236A-DC-C

Dual Column Band Saw Capacity: 36″ W x 32″ H Bar-feed: 0-24″ (Multiple Index) Blade: 27’0″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 20 HP Operation: Automatic

HEM H3236M-DC

The H3236M-DC is operated using a touch screen control mounted in a swing-away console and can be operated in manual or semi-automatic modes. Full stroking variable-pressure vise and powered guide ...

HEM H90A-1

The H90A-1 offers accurate cuts on small solids and shapes. It is perfect for cutting multiple parts of the same length up to 24” long automatically. This simple to use scissor-type band saw has a ...

HEM H90A-4

The H90A-4 offers up to 4 indexes 24” each and will cut up to 999 same-length parts. The H90A-4 gives fast accurate cuts on small solids and shapes. It is perfect for cutting multiple parts of the ...

HEM H90A-C

The H90A-C includes a 24” bar-feed, allows multiple indexes, and the ability to create and save up to 99 jobs. Each job includes a job number, part length, and quantity and it runs consecutive job ...

HEM HURRICANE 2030A

Horizontal Miter Band Saw Capacity: 30″ W x 20″ H Miter: 20″ W x 20″ left @ 45° Miter: 13″ W x 20″@ 60° Bar-feed: 0-34″ (Multiple Index) Blade: 20’6″ x 1.5″ x .050″ Hydraulic Motor: 5 HP Motor: 10...

HEM HURRICANE 2030A-CTS

The Hurricane 2030A-CTS band saw allows programmable miter cuts up to 60ᵒ in one direction. A touch screen control is mounted in a swing-away console for settings, operational functions, and diagno...

HEM HURRICANE 2030M

The Hurricane 2030M band saw miter cuts up to 60ᵒ in one direction. A touch screen control is mounted in a swing-away console for settings, operational functions, and diagnostics. The control allow...

HEM KTC-100EH

Product Description The KTC-100EH is operated with a touch screen control console. The saw head is fed with a servo motor for dynamic entry and exit and the hydraulics are hard-plumbed for more con...

HEM KTC-100NF

The KTC-100NF automatic carbide sawing machine cuts non-ferrous material. The saw head is servo-motor driven and the hydraulics are hard-plumbed for consistent operation. Automatic workpiece loadin...

HEM KTC-130SP

HEM KTC-150SP

The KTC-150SP carbide sawing machine is controlled with a touch screen interface. The saw head is driven by a servo motor and the hydraulics are hard-plumbed for more consistent operation. An autom...