Specifications
Max. swing over bed 14 7/8"
Max. length of workpiece 40"
Max. swing over cross slide 10 1/16"
Max. Swing in gap 23 1/4"
Width of Bed 10 1/4"
Effective length in gap to spindle 8 1/2"
Effective length in gap to chuck jaws 3 1/2"
Spindle bore 2 1/16" D1-6
Taper of spindle center M.T. #6 (MT6/MT4 sleeve)
Spindle speeds 45-1,800 rpm / 16 steps
Longitudinal feeds 0.0018-0.07 IPR, 42 kinds
Cross feeds 0.0009-0.03 IPR, 42 kinds
Inch threads 70-2 TPI, 45 kinds
Metric threads 0.2-14 mm , 39 kinds
Diametral Pitch threads 8-40 DP , 21 kinds
Module threads 0.3-3.6 mm, 18 kinds
Max. travel of top slide 4 1/4"
Max. travel of cross slide 8 1/2"
Spindle length w/o chuck 20 1/2
Diameter of tailstock quill 2 1/16"
Max. travel of tailstock quill 5"
Headstock size 16" x 17"
Taper of tailstock quill center MT4
Main motor 6 HP, 220V/20A, 3 Phase
Coolant pump 1/8 HP, 220V, 1 Phase
Net weight 4,350 lbs.
Overall dimensions, LxWxH 79" x 32.2" x 53"

Standard Equipment
Free SINO DRO; Installed
Free Taper turning attachment; Installed
Metal chuck guard with safety shut down when lifting chuck guard
8” 3-jaw chuck with one set reversible jaws
10” 4-jaw chuck
12” Face plate
5 1/2” large steady rest with roller jaws
Oil pump on Apron for all guideways and leadscrews
2” follow rest
Removeable gap
4-way tools post
Foot brake
Coolant system
Halogen Work light
Full length splash guard
(2) dead centers and (1) reducing sleeve MT6/MT4
Thread chasing dial
Tool box and leveling pads