ADIRA GH 00630
- 規格參數改為公制最大加工厚度0.2559"可剪寬度10.01'液壓/機械Hyd後擋料尺寸39.37"功率20.1 hp行程次數24 strokes/min.控制系統數控
- 產品概述
The ADIRA GH range of hydraulic shears are robust and reliable, characterised by their swing cut and low angle of fixed cut.
Regulation of the gap between blades, manual or automatic adjustment, variable according to the type and thickness of the material being cut.
Side arch allows for repeat cuts on sheets longer than the nominal length of the machine.
Main Features:
- Possibility of retracting the back gauge at the end of the 1000-mm stroke
- High tamping strength, proportional to the cutting strength
- Blocks with material protections eliminate or minimise markings on the material
- Adjustment of the length of the cut to increase the cutting pace on shorter sheets.Benefits:
- Different cutting capacities and lengths;
- Hydraulic Shears with Swing Cut;
- Numerical control with CybTouch8 touch screen (GH Plus);
- Motorised gap control, controlled by standard CNC (GH Plus);
- Mechanical, Hydraulic and simple Electronics; Rigid, compact back gauge.They can handle sheet metal measuring 2 to 6 metres, with thicknesses of between 4 and 13 mm. There are also a wide range of accessories and optional extras, increasing their flexibility of use.
EFFICIENCY AND EFFECTIVENESS
Reduced demand on the machine frame when cutting thicknesses less than the maximum machine capacity. - 關於公司
ADIRA is a manufacturer and global provider of engineering solutions, specialising in the production of hydraulic, electric and hybrid press brakes, shears and robotised cells. With over 60 years' experience and customers in the four corners of the world, we are able to provide an efficient response to the most complex challenges posed to us. From supplying a simple sheet metal cutting and bending solution to designing and implementing automated production, treatment and storage systems.