Machine Capacity: -Type of Welding: MAG -Welding Wire: G3Si1 -Single-Layer Welding Seam Sizes: a3 – a6 (0.12" – 0.24") -Multi-Layer Welding Seam Sizes: a8 – a15 (0.31" – 0.59") -Overall Machine Length: 79.4 ft (89.2 ft) [99.1 ft] -Overall Machine Width: 26.9 ft -Overall Machine Height: 14.8 ft -Material Processing: 4 Sides -Scanning Speed: 9.8 in/sec -Maximum Material Weight: 11,023 lbs -Maximum Material Length: 39.4 ft (49.2 ft) [59.1 ft] Materials Main Profile Dimensions: H-Beam: Height: 3.15–15.75 in Width: 5.91–29.92 in Length: 3.15–708.66 in U-Channel: Height: 3.15–4.33 in Width: 8.66–15.75 in Length: 3.15–708.66 in Rectangular: Height: 3.15–11.81 in Width: 3.15–19.69 in Length: 3.15–708.66 in Tube: Height: 3.15–11.81 in Width: 3.15–11.81 in Length: 3.15–708.66 in Part Dimensions: H-Beam: Height: 3.15–9.84 in Width: 3.15–9.84 in Length: 3.15–19.69 in U-Channel: Height: 3.94–15.75 in Width: 2.76–4.72 in Length: 3.94–19.69 in Tube: Height: 2.76–7.87 in Width: 2.76–7.87 in Length: 2.76–19.69 in Angle: Height: 2.36–7.09 in Width: 2.36–7.09 in Length: 2.36–39.37 in Plate: Height: 1.97–31.5 in Width: 3.94–39.37 in Length: 1.97–2.36 in Technical Specifications: -Pneumatic Supply: 8 bar [116 psi], 50 L/min (400 NL) (1/2") [13 gal/min] -Shielding Gas Connection: M21-ArC-18/ EN ISO 14175, 5 bar [73 psi], 1.1 m³ (3/8") [39 ft³/h] -Hydraulic Supply: 160 bar [2,321 psi] -Hydraulic Tank Capacity: 200 L [52.8 gal], mineral oil HLP Electrical Specifications: -Network Connection: 1 Gbit -Power: 70 kW -Voltage, Phase, Frequency: 400V, 3 phases + neutral, 50Hz/60Hz -Full-Load Ampere: 100A -Back-Up Fuse: Provided by the installer with 125A -Short Circuit Current Rating of the Protective Device: 65kA/480VAC -Short Circuit Current: 10kA rms symmetrical, 400V max. -Full Load Current of the Largest Motor: Approx. 32A -Control Voltage: 24 VDC