彎角鐵機ROUNDO R4S
Iowa, 美國總覽
*** WE TAKE TRADES | 4" x 4" x 1/2" Roundo R-4-S angle roll; This machine was manufactured for Roundo to Model R-4-S specifications. Roundo did not take delivery of these rolls and they have not been put into service.; Include (1) set of tooling
參數改為公制
角鋼翼寬(L1) | 4" |
角鋼翼寬(L2) | 4" |
角鋼厚度 | 0.5" |
液壓/機械 | HYD |
類型 (臥式/立式/立臥式) | HORZ/VERT |
尺寸 | 67" x 60" x 69" high |
重量 | 5,000 lbs |
配備
Rolling control stand; (1) set of tooling.
This machine was manufactured for Roundo to Model R4 specifications. Roundo did not take delivery of these rolls and they have not been put into service.
規格表
We are pleased to offer for your consideration:
(1) 4" x 4" x 1/2" Roundo Hydraulic Angle Bending Roll
Stock Number: 13840
List Price: $55,000
Manufacturer: Roundo
Model Number: R-4-S
Diameter of standard rolls: 12.2"
Angles, leg out: 4" x 4" x 1/2" - 45" dia.
Angles, leg in: 4" x 4" x 3/8" - 48" dia.
Tees, leg out: WT 4 to 40" dia.
Tees, leg in: WT 4 to 60" dia.
Tees, on edge: WT 4 to 40" dia.
Flats, on edge: 5" x 5/8" to 30" dia.
Flats, on flat: 7" x 1-1/2" to 25" dia.
Squares: 2-1/2" to 25" dia.
Rounds: 3" to 25" dia.
Round pipe: 4 Sch 40 to 45" dia.
Square tube: 3-1/2" x 1/4"
Channels, leg out: C7 x 14.75 to 30" dia.
Channels, leg in: C7 x 14.75 to 30" dia.
Channels, on edge: C5 x 6.7 to 200" dia.
Shaft diameter: 4.125"
Motor: 17.4 HP (13 KW)
Volts: 230/460
Cycles: 60 Hz
Amps: 46/23
Approximate dimensions: 67" x 60" x 69" high
Approximate weight: 5,000 lbs
Features:
Rolling control stand
(1) set of tooling
This machine was manufactured for Roundo to Model R4 specifications. Roundo did not take delivery of these rolls and they have not been put into service.
NS Machine Corp
515-999-2999
sales@nsmachine.com