CNC 車床EUROTECH ELITE MULTIFLEX 545SLY
Colorado, 美國總覽
Eurotech Elite Multiflex 545SL-Y 5-axis CNC Turning Center, New in 2014
LNS Quick Load Servo S2
參數改為公制
回轉直徑 | 22.83" |
加工長度 | 22.04" |
軸數 | 5 |
棒料加工能力 | 2" |
卡盤直徑 | 8" |
Distance Between Centers | 22.04" |
最大車削直徑 | 12.6" |
功率 | 20 hp |
最大轉速 | 5,000 RPM |
尾架 | No |
動力刀具 | Yes |
副主軸 | Yes |
# of Turrets | 1 |
尺寸 | 167" (w/ Conveyor) x 77" x 79" |
重量 | 11,000 lbs |
配備
Fanuc 32i-B CNC Control; Axes: X,Y,Z,C1,C2
LNS Quick Load Servo S2 Magazine Bar Loader (2013) (Short Loader)
JetStream 1000 psi High Pressure Coolant System, Mdl JSBT-1L-T; includes Filter unit
Parts Catcher AND Parts Conveyor
OD/ID Tools, (2) Cross Drill and (3) Live Z axis (axial) tools included - Algra T134-0007
Chip Conveyor
Coolant tank with Oil Skimmer
1-shift machine
Note: This is the newer USA model for the Eurotech Elite Multiflex 545SL--Y7
規格表
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Bar Capacity: 2"
Machining Diameter: 12.60"
Machining Length: 22.04"
Swing Over Diameter: 22.83"
Y-Axis Stroke: +2.36 / -1.97"
Main Spindle
Draw Tube Capacity: 2.04"
Spindle Bore: 2.34"
Spindle Speed: 5,000 RPM
Spindle Motor: 20 HP
Spindle Nose: ASA 5"
Sub Spindle
Bar Capacity: 1.77"
Spindle Bore: 2.16"
Spindle Speed: 5,000 RPM
Spindle Motor: 15 HP
Spindle Nose: ASA 5"
B-Axis Travel: 19.29"
Rapid Traverse Rate (B-Axis): 1181 IPM
Spindle Positioning (Fully Programmable): .001 Degree
Turret
Indexing Time: 0.2 Seconds/Position
Indexing Type: Bi-Directional
Number of Stations: 12
Live Tools
Number of Positions: 12
Motor: 5 HP
Tool Speed: 4,000 RPM
Drilling Capacity: 25/32"
End Mill Capacity: 25/32"
Machining Capacity: .5"
C-Axis
Main / Sub Spindle: Yes
Spindle Positioning: Full C
Command Increment: 0.001 Degree
Positioning System: Scale Feedback
Degree of Movement: Programmable
Rapid Speed Rate: 100 RPM
General
Voltage: 400 V AC/3 Phase
Air Required: 80 PSI @ 4 CFM
Amperage Draw: 45 Amp
Machine Dimensions (with Chip Conveyor): 77" x 79" x 167"
Machine Weight: 11,000 lbs