槍鑽ELDORADO M75-15C
美國總覽
3/4" x 15", Eldorado M75-15C, 2-Spdl, 2HP, 1445 - 11,740 RPM, AB HMI, 2005
參數改為公制
最大鑽孔直徑 | 0.75" |
最大鑽孔深度 | 15" |
主軸數量 | 2 |
規格表
Serial No. EL-2068/RH, EL-2067/LH
New - 2005
SPECIFICATIONS:
Number of Gun Drilling Spindles…………2 (Independent)
Capacity with 15" Stroke…………3/4" Diameter
Gun Drilling Diameter Capacity - Mild Steel…………0.055" to .75"
Ball Screw Stroke Length…………15"
Spindle Speeds - Infinitely Variable…………1,445 - 11,500 RPM
Ball Screw Feed Rate…………0.1 - 99.9 IPM
Jog Reverse & Forward Feed Rate…………200 IPM
Right Hand Spindle Motor…………3.0 HP, 3,450 RPM
Left Hand Spindle Motor…………3.0 HP, 1,725 RPM
Electrics…………208-230/460V/3Ph/60Hz
Current Configuration..............230/3Ph/60Hz
Dimensions - Catalog…………75"L x 64"W x 58"H
Weight - Catalog…………4,000 Lbs.
ELDORADO F18-1101 HIGH PRESSURE COOLANT SPECIFICATIONS:
Pressure - Variable…………200 - 2000 PSI
Volume - Variable…………0 - 18 GPM
Reservoir Capacity…………90 Gallons
Dimensions - Catalog…………78"W x 34"L x 34"H
Dry Weight - Catalog…………1,000 Lbs.
EQUIPPED WITH:
(2) Allen Bradley PanelView 550 HMI
(2) Allen Bradley Micro-Logix 1500 PLC
(2) Remote station push button controls for: clamp, unclamp, cycle start
(2) Servo Dynamics SD94 Variable frequency Drives (in-feed)
(2) Servo Dynamics servo feed motors with integral tachometer
(2) Eaton Cutler Hammer MVX9000 Sensorless Vector Spindle Drives
Eldorado model #F-18 high pressure coolant system with heat exchange
(2) Mega Flo-Minder rate monitors
Spindle load-minder
Mist minder air-oil mist spindle lubrication system
Full enclosure
Machine Documentation
*Preliminary specifications, pending confirmation.