線切割設備AGIE CLASSIC 2S
Oregon, 美國總覽
Agie AC Classic 2S Wire EDM, New in 2004
There is a ton of stuff here for this fantastic value
MUST MOVE
Location: Oregon
參數改為公制
X軸行程 | 13.77" |
Y軸行程 | 9.84" |
Z軸行程 | 10" |
自動穿絲 (是/否) | Yes |
浸入式(是/否) | Yes |
尺寸 | 65" x 80" x 88" |
重量 | 5,908 |
配備
-machine sold with all consumables, parts, boards, etc.
-Agievision Cut Classic S Control Software
-Affinity Chiller
-Remote Pendant
-Spool Feed
-Transformer (see pics for details)
Powertrain
Cat. No.: AG3-15k 15 KVA 3 Phase
Primary Voltages: 200-208-230-240-440-460-480
Secondary Voltage: 400Y / 231V X1-X2-X3-X0
HZ: 60
Electrostatic Shield
規格表
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Manufacturer: Agie SA (Switzerland)
Model: Agiecut Classic 2S
Serial No.: Available for Serious Inquiry
Date of Manufacture: 2004
Electrics: 400 Volt / 60 Cycle / 3 Phase / 14 Amps
Rated Power: 9 kVA
Specifications and Features:
...Max WP Dimensions: 29.5" x 21.7" x 9.8"
...Travels:
......X-Axis: 13.8"
......Y-Axis: 9.8"
......Z-Axis: 10"
...Rapid Feeds
......X,Y-Axis: 35.4 IPM
......Z-Axis: 23.6 IPM
...Surface Finish: 12 RMS
...Tolerance (Standard): 0.00024"
...Smallest Wire (Standard): 0.008"
...Control Screen: Color TFT 15" XGA
...Remote Pendant
...Threadable Height: 9.84"
...Floor To WP Clamping Level: 42.3"
...Spool Feed
...Control Software: Agievision Cut Classic S
...Transformer (see pics)
...Affinity Chiller (see pics)
NOTE: See attached picture of specification sheet from manual for more information.
Equipment Dimensions (from manual): 65" x 80" x 88" Tall
Equipment Weight (from manual): 5,908 lbs.
Travels (X,Y,Z): 13.8" x 9.8" x 10"
Rapid Feeds (X,Y/Z): 35.4 IPM / 23.6 IPM
Surface Finish: 12 RMS
Tolerance: 0.00024"
Smallest Wire (Standard): 0.008"
Threadable Height: 9.84"
Floor To WP Clamping Level: 42.3"
Electrics: 400 Volt / 60 Cycle / 3 Phase / 14 Amps
Machine Dimensions (from manual): 65" x 80" x 88" Tall
Machine Weight (from manual): 5,908 lbs.
Functionality Notes:
This is a 2nd-owner machine; purchased from original owner. It is in EXCELLENT condition and has low hours. Machine is coming from a prototype shop, not a production shop.
Run less than 200 hours by current owner; unit has been well-maintained and meticulously cared for, as evidenced by imbedded photos and video.
Unit is presently under power for the next few weeks from time of this posting. Estimate disconnection by end of June or beginning of July 2023.
Available for inspection and test at this time.
查看此類型更多的產品
查看全部查看此品牌更多的產品
AGIE AGIETRON SPIRIT 3
電火花成形機床
AGIE AGIETRON SPIRIT 2
電火花成形機床