列印此頁

GLEASON PFAUTER PSA 150 插齒機

上市資訊

ID ＃
491800
庫存 ＃
683732
品牌
GLEASON PFAUTER
模型
PSA 150
類型
插齒機
序號
13.087
控制
CNC系統 (SIEMENS 840 C)
年
1998
使用狀況
良好
地點
德國

規格

齒輪最大直徑
5.9055"

配備

* SIEMENS – CNC – Control Model 840 C with colour monitor and direct input of all relevant gear tooth data according to the Original GLEASON-PFAUTER Surface for an automatic working process with presettable roughing, finishing and spark-out cycles. Dialog software also with error diagnostic providing helpful information how to solve the problem. * Machine is equipped with an axial adjustable shaping slide as a full CNC-Axis in order to cut multiple gears in one set-up, also using a tandem-toolset for gears with different Sizes * Hydrostatic shaper spindle bearings/Straight guide. ( High Precision) * Built in table Workpiece Clamping device with a Hydraulic Collet clamping device on the table, in conjunction with a semi-automatic “ring” loading device where the blanks and the finished parts are picked off manually outside of the working area. Dia. of the pockets / workpiece 140 mm. * Complete Workarea Housing with Sliding door, * built in Coolant Unit with chip conveyor,

規格表

External Gear / Internal Gear max. Cutting-Ø                                          150   mm

Max. swing Ø of workpiece                                                                           300   m

 

Module range max.                                                                                          4  

Length of stroke max.  (Z2-Axis)                                                                 55   mm

 

Gear width approx.                                                                                          50   mm

Vertical adjustment of shaping head, approx. (Z-Axis)                             250   mm

Spindle taper                                                                                                      ?  

No. of strokes, infinitely variable                                                       50 – 1,300   /min

 

Table Ø / table bore (C-Axis)                                                                150 / 63   mm

 

Distance between Center of Shaping spindle and column                       350   mm

Mounting height between table and shaper spindle, up / down      250 / 580   mm

Radial Cutting Slide adjustment (X-Axis)                                                    290   mm

 

Feed range at tooth depth (Cutting Slide-X-Axis))                            1 – 5.000   mm/Min.

Feed Range Axial Shaping Slide adjustment (Z-Axis)                       15 / 125   U/Min.

Feed range Rotation of Tool resp. Table ( C2 and C-Axis)          235 / 1.000   U/min. (?)

 

Total electrical load, approx.                                           30 kW  -  400 V  -  50   Hz

Weight, approx.                                                                                           8.500   kg

相片