BOSCHERT EAGLE
BOSCHERT K 30-120
BOSCHERT K30-120 MINI S
BOSCHERT LB 13 KE
BOSCHERT LB 13 KE QUICK
BOSCHERT LB 15/2000
BOSCHERT LB12/4
BOSCHERT LB12/6
BOSCHERT LB13
The LB 13 Standard is the basic model of its line and permits notching with a fixed angle of 90°. lt guarantees clean cuts in all sheet metal thicknesses and high repetitive accuracy of the notchi...
BOSCHERT LITE
BOSCHERT PN
8-7/8" x 8-7/8" x 5/32" BOSCHERT POWER NOTCHER MODEL PN4 S/N 1969 Year 1993 Capacity .........
CHICAGO DREIS & KRUMP HN-25
Chicago Dreis & Krump's productive, reliable, heavy duty, hydraulic notcher for all your notching needs. It will shear mild steel and stainless at high production speeds and it's a snap to operate....
DAKE DLN-6200
This corner Notcher has a 6mm or 4-gauge mild steel capacity, so it can make quick work of most any job. The DLN-6200 sheet metal corner Notcher machine has blades that are fixed at 90°, ensuring a...
DAKE DLN-6220V
This model hydraulic Notcher will cut notches from 30 to 140 degrees in mild steel and up to 6mm in thickness and will do this at a maximum rate of 15 strokes per minute. 24 Ton Capacity 4 Ga. Mild...
KNUTH KAM 250
•The KAM 250 fixed-angle notches features a compact design and long cutting length •The powerful hydraulic drive and heavy, rigid construction allow machining of up to 0.3 in thick plates •Automati...
LOCKFORMER ROTO NOTCHER
Dove-tail notch out of 24 to 30 gauge galvanized — in only one pass! Just cut to width and length or use scrap. This machine uses either 3" or 6" width blanks with simple adjustment.
LOCKFORMER SPEEDNOTCH 16
Speednotch allows you to gang-notch sheet metal hydraulically up to 600% faster than by hand, without layout or scribing. It’s the perfect tool for preparing ductwork to receive bar, slip or “S” a...
LOCKFORMER TDC NOTCHER
TDC NOTCHER comes standard with 5 notching heads. The Lockformer TDC NOTCHER will gang notch duct blanks as much as 6 times faster than notching by hand. The Hydraulic powered notch units have in...
RAMS 2001
Notch drive cleats before or after they are formed. Mounts readily to a bench. Easy spring loaded push handle. Easy to change hardened shear blades.
TIN KNOCKER 1655
A heavy versatile tool capable of not only notching to capacity but also shearing and piercing operations in lighter gauge. Of heavy cast iron and fabricated construction, this table top machine co...
TIN KNOCKER EDGE
Round surface edges for collars and end caps.
