SUNPOC JBDW-300YI
- 产品概述
JBDW-300Y Computer Control
Low Temperature Automatic Impact Tester
The impact tester is used for testing the impact resistance of the metal material at a low temperature and dynamic load state so as to determine the property of the material at the low temperature and dynamic load state. The impact tester is a testing instrument indispensable to the material test and the research and development of new materials by units of metallurgical machinery manufacturing and scientific research testing.
The tester is automatically controlled by a microcomputer and electrically and mechanically controls the pendulum raising, pendulum hanging, feeding, positioning and impacting. The tester, which is equipped with a special sample feeding device for automatic feeding, automatically positions the end face of the test sample, ensures that the time from discharge to impact of the test sample is not more than 2 seconds, and meets the requirement of a metal low-temperature Charpy impact test method. After the test sample is punched and cut, the tester can utilize residual energy for automatic pendulum rising and preparation for next test and has high working efficiency. The microcomputer can calculate and display the impact absorption power and impact toughness of a material, a raising angle of a pendulum hammer and the mean value of the test, and can print the data of the current test and the mean value of the test. The temperature index can fully meet various temperature controlling requirements stipulated by national standard GB229-2007.
JBDW-300Y Microcomputer Control Low Temperature Automatic Impact Tester: adopting a compressor for refrigeration.Specification Technical:
Model JBDS-300Y I
Impact Energy 150/300J
Included Angle of Impact Blade 30°
Pre-raising Angle of the Pendulum Hammer 150°
Distance between the Center of the Pendulum Shaft and the Impact Point 750mm
Impact Speed 5.2m/s
Span of the Test Sample Support 40mm
Round Angle of Tong Mouth R1-1.5mm
Round Angle of Impact Blade R2mm,R8mm
Specification of Test Sample 10mm×10mm×55mm
Capacity of Test Sample Box 20 pieces
Refrigeration Mode Compressor
Low Temperature Range 0~-80℃
Temperature Control Precision Fluctuation ±0.5℃ Grads: 1 degree
Over Size 1600x850x1530mm
weight 880kg
Impact test POWER AC 380V 50Hz - 关于公司
贵州晟博特科技有限公司(GUIZHOU SUNPOC TECH INDUSTRY CO., LTD.)主要提供万能材料试验机,硬度计,轮廓投影仪,影像测试仪,工具显微镜,测长仪,数显卡尺和测量软件,以及机床和机床附件等产品。