BMEIMT BV55-120
- 规格参数改为公制X轴行程47.244"Y轴行程21.654"Z轴行程25.591"工作台宽(W)24.016"工作台长(L)59.055"控制系统数控系统
- 产品概述
Item BV55-120
Travel
X axis 1200 mm
Y axis 550 mm
Z axis 650 mm
Spindle nose to table 162-812 (BT40), 127-777 (BT50) mm
Spindle to column 725 mm
Work Table
Work table size 610×1500 mm
T-slot 5-18×100×125 mm
Max. loading capacity 1000 kg
Feeding
Rapid moving speed (X/Y/Z) 24000 mm/min
Feeding speed (X/Y/Z) 3-20000 mm/min
Spindle
Speed 60-7000 (10000), 60-6000 (BT50) rpm
Taper 7:24 No.40 or 7:24 No.50
Diameter φ70 mm
Torque 114.6 Nm
Power 9-11 Kw
Tool Magazine
Type ATC
Capacity 24 (BT40)/24 (BT50) pcs
Time 2-3 sec.
Max. tool dia. 80/127 mm
Max. tool dia. w/o tool on side 125/200 mm
Max. tool length 300 mm
Max. single tool length 8-15 kg
Tool magazine loading capacity 120/192 kg
Power Source
Full loading current 100 A
Compressed air pressure 0.6 mpa
Electric power 380(1±10%)V 50HZ
Overall Size
Overall size (L/W) 3750×3120 mm
Floor space 5013×3521 mm
Height 3139 mm
Net weight 9500 kg
CNC System FANUCFeatures and Application
Features
-- Bed Type structure with fixed column
-- X and Y Axis go through cross moving table
-- Each linear motion axis use imported rectilinear rolling guide, ball screw and
servo motor.
-- Enlarge the span of guideway on Y axis furthest, eliminate the gravity tips during
X axis moving, so that ensure the stability and rigidity of machine;
-- The column is herringbone to enlarge the section size, and ensures the
construction and combination rigidity.
-- ATC system is fixed on the column, realizing automatic tool change.
-- High quality specialized bearings are used to main spindle, and all components
of spindle are no rotation vibration after strict motion balance. Tool storage uses
steel ball collet and disk spring to get tools tied and untied. Pulling force is from
disk spring. Unclamping force is from cylinder.
-- The synchronous dentiform belt is transferred between spindle and motor, the
transmission ratio is 1:1;
-- Various combination of shanks and rivets can be used to spindle
-- The guide way and ball screw are lubricated automatically by thin oil;
-- Two automatic chips conveyor, interior and exterior and are applied. Interior
screw chip conveyor, which makes machine body structure reasonable and
ensures construction rigid. Exterior chip conveyor is raddle type placed in the
rear part of machine.
-- The machine surface is equipped with closed protective cover with cocoon and
dual-door. Stainless steel shield are used on all guideways.
-- Two electric cabinets are combined with main body of machine as one,
unnecessary to disassemble during transportation or installation.
-- Modularization structure design guarantees flexible configuration with kinds of
special options.
-- Various sensor, closed loop control laser scale and rotary table can be installed
optionally;
Application
BV55 serious vertical machining centers use CNC system provided by professional
suppliers. Each linear motion axis, spindle as well as additional rotation axes are
driven by servo motors, 3-axis ganged, milling, boring, drilling and rigid threading,
which is suitable for light and general processing. Digital precision positioning can be
achieved. With motion axes plugging and ganged, processing large screw and
curved surface can be realized. Various working procedure of rough and précised
machining can be achieved with one-time clamp on the same machine tool.
Meanwhile, multiple typical cycle program is installed in the NC system as options
during processing. Pre-set program controls cutting, coolant supply, and tool change,
etc. In the process of tool change, air will be blown from spindle center automatically
to keep shank and taper-bore clean. Clips produced by cutting can be cleaned to the
chip collecting cart through interior and exterior chip conveyor. - 关于公司
北京机电院机床有限公司源于1907年的京师初等工业学堂,与北京工业同步诞生,前身曾是北京第六机床厂(1969年)和是北京市属机电行业最大科研事业单位,即北京机电研究院(1978年)。在2002年7月改制成为北京机电院高技术股份有限公司。为适应市场及控股公司产业战略整合的需要,于2010年12月注册成立了北京机电院机床有限公司。 公司自1978年一直致力于立式加工中心的研发、生产、销售和服务。现公司产品包括五轴叶片加工中心、五轴叶轮加工中心、三/四轴立式加工中心、钻削中心、磨床及精密专机等。公司始终秉承诚信创新、制造精良、真诚服务、顾客至上的经营方针,提供满足客户需求、质量稳定、技术优越的机床产品和高效高质的服务。经过多年的不懈努力,公司已形成了在中高端立加产品,特别是五轴机床产品方面的领先优势。 公司的立式加工中心产品是通过自主研发,及引进和吸收国外先进技术来实现其不断的提升和创新,通过规格的生产装配流程和完善的质量管理体系赢得了在汽车、模具等多领域的高度认可。整体丰富的产品线均采用模块化设计和生产以满足客户的多样化需求,采用不断优化的产品结构、高品质的配套件、高标准的检验要求以保证产品的高效高质,为客户创造更大的价值。