10 x 24 3R LANDIS 30 DEGREE ANGLE HEAD CYLINDRICAL GRINDER S/N 848-26 Year: 1978 STANDARD CATALOG SPECIFICATIONS Nominal work swing..................................... 10 Maximum work swing over table.......................... 10 31/32 Nominal distances between work centers................. 24 Maximum work swing and diameter standard machine will grind with full size standard wheel on machine with hydraulic infeed stroke...................... 106‑2 H.I. Minimum diameter wheel to grind zero diameter work on centers................................................20 Coolant tank capacity.................................. 40 gallons Hydraulic tank capacity................................ 19 gallons WORK CARRIAGE Traverse speed, all lengths thru72......... 2 to 240 IPM Traverse speed, per turn of handwheel: (slow)............... 0.100 (fast)......... 0.750 Work rest capacity........................... 1/2 to 7 HEADSTOCK FOOTSTOCK Work centers.................................No. 10 Jarno Foot stock center movement by................ lever and hand wheel Head stock work speeds RPM Dead spindle................................. 72‑116‑185‑300 WHEELHEAD WHEELFEED Grinding wheel, size(standard).................... 8 x 24 x 12 Grinding wheel, maximum width...................... 8 Grinding wheel, spindle speeds..................... 800/964 RPM Grinding wheel, minimum diameterof worn wheel..... 12 Basicmachine................................. 0.0003 to 0.004 Machine w/hydraulic infeed................... 0.0002 to 0.004 Distance wheel centerline to work centerline: Work diameter reduction per revolution of wheel feed hand wheel........................................ 0.100 Work diameter reduction per revolution of fine knob: Basic machine...................................... 0.010 Hydraulic infeed.................................. 0.001 Maximum hydraulic in feed on diameter for hydraulic in feed machines................................... 0.090 Rapid in feed stroke for hydraulic in feed machines: Maximum............................................2 Minimum............................................1/2 ELECTRIC MOTORS Wheel drive motor.................................. 10 HP Wheel spindle lubrication pump motor............... 1/4 HP Work drive motor................................... 1/4 HP Hydraulic pump and lubricating drive motor......... 2 HP Coolant pump motor................................. 1/4 HP GENERAL DATA Swivel table graduated inches per foot............. 4 1/4 Degrees included angle............................. 19 degrees Height from floor to work centerline............... 40 3/4 Net weight......................................... 10,400 lbs. EQUIPMENT FEATURES Plunge control stepping motor. Hydraulic operated tail stock. Behind wheel Tru-form dresser. Landis Microtronic controls. Microsphere bearings. Very good operating condition! G.C.H. has many Cylindrical Angle Head Grinders in stock. If for some reason this machine does not fit your requirements please don’t hesitate to ask your salesman about the many others in stock. Specifications are deemed accurate, however, subject to verification or prior sale. All exchange units/returns must be shipped within 30 days. All exchange units/returns must be shipped using DDP terms - Grinders Clearing House, Inc. dba GCH Machinery, is not responsible for any customs formalities or shipping costs. If Grinders Clearing House, Inc. dba GCH Machinery does not receive exchange/core unit back within 30 days, GCH will invoice FULL replacement cost (OUTRIGHT Cost) to customer.