CNC 车床HAAS ST-20
美国总览
This Haas ST-20 comes fully equipped with a Tool Setter, Chip Conveyor, and an 8” Chuck! Machine was cutting exclusively aluminum and only ran prototype work. Under power and available immediately.
参数改为公制
| 回转直径 | 21" |
| 加工长度 | 22.5" |
| 轴数 | 2 |
| 卡盘直径 | 8" |
| 棒料加工能力 | 2.5" |
| 功率 | 20 hp |
| 最大转速 | 4,000 RPM |
| 最大车削直径 | 13" |
| 尾架 | Yes |
| 动力刀具 | No |
| 副主轴 | No |
| 方面 | 142.5″ x 90″ x 92″ High Approx. |
| 重量 | 8820 lbs Approx. |
配备
8″ 3-Jaw Chuck
A2-6 Spindle Nose Adaptor
Tool Presetter (Upgraded $5295 value Included)
Programmable Tailstock (Upgraded $7395 value Included)
Visual Part Programming System
User-Definable Macros
Chip Conveyor (Upgraded $5295 value Included)
Foot Switches
Misc. Tool Holders and Collets
规格表
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
Features:
Haas CNC Control
12 Station Automatic Turret
1GB Max. Memory
Rigid Tapping
Coolant System
Automatic Lubrication system
Capacity:
Max Turning Diameter : 13.0″
Max Swing Over Bed : 21.0″
Max Turning Length: 22.5″
Max Bar Capacity : 2.50″
Travels:
X Axis Travel : 8.4″
Z1 Axis Travel : 22.5″
Feedrate:
Rapid Traverse X Axis: 945 IPM
Rapid Traverse Z Axis: 945 IPM
Spindle:
Spindle Nose: A2-6
Spindle Bore: 3.5″
Spindle Speed: 4000 RPM
Spindle Motor: 20 HP
Turret:
Turret Capacity: 12 Stations
Turret Index Time: 1 Second
Tailstock:
Tailstock Taper: MT-4
Tailstock Quill Dia.: 2.6″
Tailstock Quill Travel: 3.1″
General:
Air Requirement: 4 scfm @ 100 psi
Power Source: AC 220v / 3-Phase / 60 Hz
Machine Dimensions: 142.5″ x 90″ x 92″ High
Machine Weight: 8820 lbs Approx.
