龙门加工中心(包括桥梁和双立柱)SNK HF-6M
Niedersachsen, 德国总览
This Double column 5-face machining centre made by SNK Japan is in superb condition with less than 1500 run hours .
It is fitted with all the options to make 5-face machining easy and comfortable.
Tool changer and head changer with heads make machining in one setup possible.
This avoids delay, and loss of accuracy.
参数改为公制
X轴行程 | 364.17" |
Y轴行程 | 165.35" |
Z轴行程 | 39.37" |
功率 | 49.6 hp |
主轴转速 | 3,000 RPM |
工作台宽(W) | 118.11" |
工作台长(L) | 314.96" |
刀库容量 | 60 |
主轴锥度 | BT50 |
尺寸 | 24900 x 9100 x 8400 |
控制系统 | 数控 (Fanuc 31-iB) |
配备
60 station tool magazine and automatic tool changer ATC.
Tool changing in Vertical & Horizontal spindles (heads).
5 station Head magazine and automatic head changer AAC.
Angle heads indexing 1° increments (standard is 4 x 90°).
Universal center swivel head indexing at 1°/1° increments in B-Plane and C-Plane. B 0-95°. C 0-359°
90° angle head L 700 mm.
90° angle head L 500 mm.
Universal center swivel head L 800 mm.
Vertical high speed head to 6000 rpm.
90° high speed angle head to 15000 rpm.
Special software for attachments (heads).
Chip conveyor.
Air blow.
X,Y,Z axes linear scale feedback for highest accuracies.
规格表
Double Column Machining Centre for 5-Face Machining.
SNK Multi Center HF-6M.
Year 2016, installed 2017.
Fanuc 31i CNC.
Distance between the columns 3500 mm.
Table longitudinal travel X 9250 mm.
Spindle head cross travel Y 4200mm.
Ram vertical travelZ 1000 mm.
Crossrail vertical travel W 2200 mm.
Table top to spindle nose max. 3500 mm.
Table size 8000 x 3000 mm.
Table load 40000 kg (60000 kg evenly over the full table).
Spindle drive motor 37/45 KW.
Spindle speeds 30 - 3000 rpm.
Spindle torque max. 1954 Nm.
60 station tool magazine and automatic tool changer ATC.
Tool changing in Vertical & Horizontal spindles (heads).
5 station Head magazine and automatic head changer AAC.
Angle heads indexing 1° increments (standard is 4 x 90°).
Universal center swivel head indexing at 1°/1° increments in B-Plane and C-Plane. B 0-95°. C 0-359°
90° angle head L 700 mm.
90° angle head L 500 mm.
Universal center swivel head L 800 mm.
Vertical high speed head to 6000 rpm.
90° high speed angle head to 15000 rpm.
Special software for attachments (heads).
Chip conveyor.
Air blow.
X,Y,Z axes linear scale feedback for highest accuracies.
AS NEW CONDITION WITH LESS THAN 1500 Hours !
查看此类型更多的产品
VISION WIDE VB3016
龙门加工中心(包括桥梁和双立柱)
VISION WIDE VF4000
龙门加工中心(包括桥梁和双立柱)
QUICKMILL INTIMIDATOR 120
龙门加工中心(包括桥梁和双立柱)
OKUMA MCV 21-41
龙门加工中心(包括桥梁和双立柱)