普通车床VICTOR 2980T
美国总览
29" X 80" Victor Gap Bed Engine Lathe With 4" Spindle Bore
参数改为公制
| 回转直径 | 29" |
| 横拖板上最大回转直径 | 20.5" |
| 顶尖间距 | 80" |
| 主轴孔径 | 4" |
| 主轴转速 | 1,200 RPM |
| 功率 | 15 hp |
| 尺寸 | R-L 140" X F-B 72" X Height 72" |
| 重量 | 9,250 Lbs. |
配备
FEATURES:
High precision hardened and ground spindle
Hardened and precision ground induction bedways with high tension mechanize casting iron
The spindle is supported by 3 bearings (2 taper roller bearings and one ball bearing)
4-1/8" large spindle bore with D1-11 camlock spindle nose
Rapid and positive magnetic disc brake system is operated by emergency switch control or foot brake
All running parts are lubricated by a pressure pump in gearbox
Sliding, surfacing, and screw-cutting motions are fully interlocked in the apron
A cone-clutch device in the apron to prevent overload
Dual speed tailstock quill (ratio 1:1 and 1:4) provides easy drilling operation
4-way power rapid traverse
Ampere meter for power consumption monitoring
Jog button for easy spindle speed changes
20 HP main motor
Tough built to last with large 4-1/8" spindle bore, 4-way rapid traverse, and 20 HP main motor. The best in its class to handle upmost demanding work.
规格表
Swing Over Bed Ways................................29-1/8"
Swing Over Cross Slide.............................20-1/2"
Swing In Gap.......................................37-25/32"
Cross Slide Travel.................................16-1/4"
Compound Travel....................................8-1/4"
Bed Width..........................................16-1/2"
Center Distance....................................80"
Spindle Hole.......................................4.13"
Spindle Speeds (12)................................15 To 1,200 Rpm's
Spindle Nose.......................................D1-11
Chuck Size New Gator...............................20" 4-Jaw W/2 Piece Jaws
Feeds Cross........................................0.0004 To .0118"/ REV
Feeds Long.........................................0.0012" TO .0287" / REV
Threads Inch (45)..................................2 To 56 TPI
Threads Metric (31)................................0.05 To 13 MM
D.P................................................2 T 160 T.P.I.
Module.............................................0.5 To 40
Lead Screw Diameter And Threads....................1.97" / 2 TPI
Tail Stock Quill Diameter..........................4.1"
Tail Stock Quill Travel............................7"
Tail Stock Taper...................................#5 Morse
Main Motor.........................................20 Hp.
Floor Space........................................R-L 140" X F-B 72"
Machine Height.....................................72"
Machine Weight.....................................9,250 Lbs.
Coolant Pan........................................Yes
Harden & Ground Ways...............................Yes
Foot Brake.........................................Yes
Rapids On Longitudinal Travel......................Yes
Note:
Machine has been cleaned, painted and cylced. New belts,
Headstock and apron flushed and cleaned and new oil.
Optional Equipment: Prices subject to change without notice:
Taper Attachment Installed........................$7,450.00
Newall 2 Axis D.R.O. System Installed.............$5,450.00
Aloris Type Tool Post & 5 Holder..................$1,950.00
New Gator 18" 3-Jaw Chuck With Two-Piece Jaws.....$3,975.00
Used Chuck 18" 6-Jaw..............................$3,250.00
Prices subject to change without notice:
