FOR SALE: 60" x 7.00" x 24,000LB Cincinnati/Forte Slitting Line Manufacture - Cincinnati/Forte - New - 1969 - Many upgrades Material - Cold rolled + Aluminum Strip Width - 60" max Strip Thickness - .010" - .119" Coil Size - Entry ID = 16 - 24" - Exit ID = 16" / 20" & 24" - OD = 60" max entry and exit - Entry Weight = 24,000 lbs - Exit Weight = 20,000 lbs Max. Shear - 45,000 PSI Max. Yield - 45,000 PSI Line Direction - Left to Right Mode of Operation - Driven Line Speed - 250 / 500 fpm (approx.) Equipment Entry Turnstile: - Four (4) Arms x 25,000lbs/arm - Powered Rotation - Slotted for C-Hooks Entry Coil Car: - Mast Type - Floor Mounted - Powered Lift and Traverse - Self-Contained Hydraulics - Machine Mounted Controls Uncoiler: - Single Mandrel Type - Hydraulic Expansion - Holddown with Powered Snubber Roll - Wichita Water Cooled Brake - AC Feed up Drive - Slide Base - Paper Winder Outboard Support - A & B: - Powered Extension / Retraction Entry Unit: - Extending Blade Peeler - Manual Side Guides - Powered Entry Pinch Rolls (incomplete) - PVC Applicator - Idler Pinch Rolls for PVC Application - Rotary Crop Shear Stationary Slitter Base: - 20 HP AC Leeson Feed up Motor, 1750 rpm - Renold Gear Reducer, 41.8/1 ratio - 75 HP Baldor DC Motor, 1760 RPM, (New in 2001) - Powered Head Lock Two (2) Slitter Heads: - Injector Type - Powered Traverse - Powered Top Arbor Adjust - Powered Outboard Retraction - "Over the Arbor" design for slitting widths between 48-60" - Head #1 - 5" Diameter Arbor - Head #2 - 7" Diameter Arbor - 75 HP DC Drive for Slitter Head (New in 2003) Pit Section: - Inspection Table - Powered Cross Over Table Tension Stand: Combination Drag and Roll Type Strip Separator Arm - "Drag" Type with two (2) Cylinders - Two (2) 14" Diameter Tension Rolls - Two (2) Wichita Water Cooled Brakes Recoiler: - 16" Dia. Drum - Hydraulic Pushoff - Hydraulic Expansion & Gripper - Overarm Separator Assembly - 150 HP Baldor AC Motor, 1150/2000 RPM (New 2001) - Two (2) Speed Transmission, 2:1 and 1:1 ratios - Bolt-on Risers for 20" & 24" Exit Coil Car: - Mast Type - Floor Mounted - Powered Lift and Traverse - Self-Contained Hydraulics - Narrow Coil Retainers - Machine Mounted Controls Exit Turnstile: - Two (2) Arms x 20,000lbs/arm - Powered Rotation - Slotted for C-Hook - Powered Lift / Retract Two (2) Scrap Winders: - Hydraulically Powered - Manual Scrap Dump - Level Wind Electrical Controls: - Main Operators Control Console - Auxiliary Operators Control Console Slitter Tooling: Approx. Knife Count - 80 - 0.250" x 5" ID - 50 - 0.500" x 5" ID - 59 - 0.250" x 7" ID (beveled) - 47 - 0.250" x 7" ID (beveled) - 58 - 0.250" x 7" ID - Rubbers / Spacers / Shims / Separator Tooling - Hydraulics System - Water Cooler - Removed and in Storage Sold "as is, where is" EXW off foundation, USA.