拉丝机FASTENER ENG DTM-O3-20
美国总览
Discover the 20" Fastener Engineering Wire Machinery. This used model, known as DTM-03-20 Bull Block, a performance piece once hailing from the reputable FASTENER ENG brand. Possessing a capstan diameter of 20" (508mm), it can handle a torque of up to 25,000 lbs. (11,340 KG). Its speed can vary from 9-80 FPM, making it suitable for either slow-speed wire drawing or in-line with a cold header. Providing convenience, it's equipped with fork lift rails and an easy plug-in electrical connection. Note - buyer must replace the die box. Operating LV: 230/460V, 3-phase, 16.4/8.2 Amps with a 3HP motor. Overall dimensions: 32" L x 26" W x 44" H, weight: 1160 lbs. As is, where is.
规格表
MACHINE# 11934
SPECIFICATIONS:
MANUFACTURER: FASTENER ENGINEERS (NOW RMG)-USA
MODEL No.: DTM-O3-20
SERIAL No.: 886-6144
CAPSTAN DIAMETER: 20" (508mm)
TORQUE: 25,000 LBS. (11,340 KG)
SPEED RANGE: 9-80 FPM (2.75-24m/Min.)
TORQUE RANGE: 0-25,000 IN-LBS
APPLICATION: IDEAL FOR SLOW-SPEED WIRE DRAWING OR
IN-LINE WITH A COLD HEADER BETWEEN
PAYOFF AND FEED ROLLS.
MOTOR: 3 HP, 230/460 VOLTS, 16.4/8.2 AMPS,
3 PH., 60 HZ, U.S. ELECTRIC VARIDRIVE
MOTOR INTO VARISPEED GEAR DRIVE
FACTORY-WIRED 110 CONTROL TRANSFORMER
IN CONTROL CENTER USED FOR 220/440 VOLT,
3 PH., 60 HZ ELECTRICS USING PLUG-IN CONNECTION
DIMENSIONS: 32" L x 26" W x 44" H
(812mm L x 660mm W x 1117mm L)
WEIGHT: 1160 LBS. (526 KG)
DRAWBOX: TILT TYPE FOR EITHER WET OR DRY
LUBRICANTS AND PIVOTING ACTION
FOR LINE-UP OF DIE AND CAPSTAN.
- BUYER MUST REPLACE DIE BOX
- EQUIPPED WITH FORK LIFT RAILS AND PLUG-IN ELECTRICAL CONNECTION FOR
EASY RELOCATION
- EQUIPPED W/WIRE TAKE-UP REEL WITH 1/10 HP, 115 VOLT, 1 PH., 60 HZ,
DAYTON GEAR MOTOR
**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
