8" X 16" TSCHUDIN           "SWISS" SUPER-PRECISION         UNIVERSAL CYLINDRICAL GRINDER                                                             MODEL: HTG-400      S/N: 80-277      NEW: 1980                                                         TABLE:     NOMINAL SWING ........................... 8"                                                   DISTANCE BETWEEN CENTERS ................ 16"   TABLE SPEED ............................. 0 TO 195" IPM   TABLE DWELL ............................. 0 TO 6 SECONDS   SWIVELLING RANGE ........................ +/- 11°   WHEELHEAD:                                                 WHEEL SIZE ........................ 14"DIA. x 2"W x 5"BORE   SWIVELLING RANGE ........................ +/- 5°   MOTOR ................................... 4 HP   SPINDLE SPEEDS (3) ................ 1,640, 1,940 & 2,300 RPM   WHEELHEAD INFEED;   RANGE OF PLUNGE FEED DIAMETER    REDUCTION PER MINUTE ................... 0.0005" - 0.200"   AUTOMTIC INFEED OF THE GRINDING WHEEL    PER TABLE REVERSAL, MINIMUM INFEED   INCREMENT DIAMETER REDUCTION ............ 0.000050"   DIA. REDUCTION PER REV. OF INFEED    HANDWHEEL .............................. 0.080"   HANDWHEEL GRADUATION READS TO ........... 0.0001"   TRAVEL BY USING THE HANDWHEEL ........... 1.8"   RAPID APPROACH, AUTOMATICALLY ........... 1.5"   MOVEMENT OF WHEELHEAD SLIDE BY   HANDWHEEL ............................... 1.8"   TRAVEL OF THE WHEELHEAD SLIDE INFEED,    AUTOMATICALLY .......................... 0 TO .050" ON DIA.   INFEED SPEED, MAXIMUM ................... 1.2"/MIN.   SPARKOUT ................................ 2 TO 30 SECONDS   WORKHEAD:                                                   SPINDLE TAPER ........................... #4MT     SWIVELLING RANGE ........................ 360°   INFINITELY VARIABLE SPINDLE SPEED ....... 65 TO 500 RPM     TAILSTOCK:                                                  TAPER OF CENTER BORE .................... #3MT     TRAVEL OF CENTER ........................ 0.8"    APPROXIMATE MACHINE DIMENSIONS ....... 60"L x 48"D x 58"H   APPROXIMATE WEIGHT ........................ 4,400 LBS                                                             MACHINE FEATURES:                                         TSCHUDIN HYDRODYNAMIC TYPE CYLINDRICAL BRONZE TO            STEEL BEARING WHEELHEAD DESIGN                           SIMPLE ONE-KNOB CONTROL INITIATES ALL THE SETTINGS          FOR TRAVERSE & PLUNGE GRINDING CYCLES                    HYDRAULIC OPERATION FEATURING:                              -POWER TABLE TRAVERSE                                    -AUTOMATIC INFEED                -DUAL RATE INFEED OPTION                                  -PLUNGE INFEED                                            -RAPID WHEELHEAD ADVANCE AND RETRACTION                   SPARKOUT TIMER                                             TSCHUDIN "STANDARD" WORKHEAD w/DUAL LIVE & DEAD SPINDLE                                EQUIPPED WITH: ELECTRICAL CABINET ON MACHINE, NOT SEPARATE HYDRAULIC RESEVOIR IN BASE, ISOLATED BUT NOT SEPARATE COOLANT SYSTEM    3/60/220-440 VOLT ELECTRICS   SPECIAL NOTE: FULL & THOROUGH SERVICE DONE BY MR. BOB HOUGHTON.    BOB TOOK THE  MACHINE APART,  MADE SURE EVERYTHING  IS FUNCTIONING & IN EXCELLENT WORKING ORDER.    BOB WORKED FOR TSCHUDIN GRINDERS FOR 9 YEARS.    OUR MACHINE IS IN STOCK, READY TO DELIVER!   LINK TO VIDEO: https://youtu.be/TXklXx4azz0                    * *  EXCEPTIONAL CONDITION & APPEARANCE - WOW!  * * * * INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE * * FOR MORE INFORMATION: Call Andy at 973-497-7600