CNC 车床MIYANO GN3200
Florida, 美国总览
2020 Miyano GN3200w High Precision, Twin Spindle CNC Lathe
Low hours - - made less than 30,000 parts
参数改为公制
加工长度 | 1.96" |
棒料加工能力 | 1.37" |
最大车削直径 | 1.96" |
最大转速 | 8,000 RPM |
配备
Part Loader
规格表
General Specifications from Manufacturer's Brochure - - all details must be confirmed by the buyer
Control: FS 0i-TD 2 system
Controlled axis X, Z 2 axes × 2 systems
2 Saddle loader: 2 axes × 2 systems
1 Saddle loader: 2 axes × 1 system
Min. input increment 0.0001mm, 0.00001inch, 0.0001deg
Min. output increment X axis:0.00005mm (Radius value) Z axis:0.0001mm
Machining capacity
Max. Diameter of chuck Pull type collet chuck 40 mm Dia.
fixed type collet chuck 35 mm Dia.
Fine precision air chuck 45 mm Dia.
Power chuck 45 mm Dia.
Diaphragm chuck 45 mm Dia.
Max. Machining length 50 mm Dia.
Max. work length with loader 40 mm Dia.
Spindle
Number of spindles 2
Spindle nose Special flat
Through hole diameter 17 mm Dia.
Inner diameter of draw tube 11 mm Dia.
Spindle speed range 8,000 min-1
Slide
Number of Tool Platens 2
Type Horizontal linear tool platen
Type of slide X-axis Dovetail
Z-axis Dovetail
Control axis 2×2-Axis (Simultaneously X, Z)
Slide travel X-axis 180mm
Z-axis 200mm
Rapid feed rate X-axis 15m/min
Z-axis 15m/min
Tools
Shank size of square turning tool 10, 12, (16) mm Sq.
Number of tools Standard 5 5×2
Diameter of drill shank 20 mm Dia.
Motor
Spindle drive 15Min./ Cont. 2.2/1.5kw
Coolant
Tank type Separate type
Tank capacity 200 L
Spindle Cooling device
Tank capacity Oil Viscosity VG10, 9 L
Air supply
Air pressure supply 0.4 Mpa (4kgf/cm2)
Lubricating system
Tank capacity Oil Viscosity VG32, 1.5 L×2
Equipment power supply
Capacity 14 KVA
Machine dimensions
Spindle center height 875 mm
Machine height 1,600 mm
Floor space Width 1,400 mm
Depth 1,460 mm
Machine weight 2,700 kg
查看此类型更多的产品
查看全部查看此品牌更多的产品
MIYANO BNA-42S
CNC 车床
MIYANO BNA-42DHY
CNC 车床(五轴或更多轴联动)
MIYANO ABX-64SY
CNC 车床(五轴或更多轴联动)
MIYANO BNJ-42SY3
CNC 车床(五轴或更多轴联动)