Machine is not in working condition, and can be used for spare parts only. Workspace Chuck diameter: 250 mm Plan transfer stroke X: 800 mm Longitudinal stroke Z: 300 mm Feed Rapid speed X: 100 m/min Rapid velocity Z: 45 m/min Spindle box Spindle head (flat flange): 170h5 mm Spindle diameter in the front bearing: 120 mm Spindle bore: 79 mm Main drive Power of the three-phase hauplan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 – 5000 rpm C-axis Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Point silence accuracy: < 0.02 degrees Tool carrier Number of tool stations: 12 Tool holder according to DIN 69880 Cylinder shaftdiameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed, max.: 6000 rpm Hydraulics Content, complete: approx. 25 L Pressure max.: 80 bar Pressure for clamping device, max.: 70 bar Coolant device Content: approx. 25 L Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Fluid grease lubrication Content: 1.8 L Y-axis option Rapid velocity Y: 10 m/min Feed force: 20000 N Hub: ±50 Electrical connection Total connection value: 50 kVA Voltage: 400 V Frequency: 50 Hz Protection (sluggish) according to VDE 0100: 80 A Permissible voltage fluctuation at 400V: ± 10% Decrease Machine acceptance: according to DIN 8605 Ambient conditions Permissible ambient temperature: from +15 to +35°C relative humidity: 75% installation height: 1000 m above level Weights Net weight of the machine without chip conveyor: approx. 7500 kg Gross weight of the machine for truck freight: approx. 7800 kg Dimensions Machine without chip conveyor L x W x H: approx. 2600 x 2200 x 2800 mm #10043