Gleason Spiral bevel cutting machine model 102 s/n 609207 these Gear generating machines are used in the manufacture of cutting small spiral bevel Gears utilizing the Generating method. The Gleason 2a model is the older model, while this model is the more modern updated version. These machines manufacture high precision spiral bevel gears for the Power Hand tool business, lawn and garden, and assemblies & Gear boxes requiring right angle high torque gear sets! machine specifications:  Diametral pitch (coarsest) 16 DP 1.6 Mod Diametral pitch (finest) Limited only by smallest practical cutter point width Cone Distance 0” – 2 5/16” 0 – 59mm Workhead angle -12 deg. To 90 deg Extreme ratio Any practical ratio Minimum ratio for non-generated spiral bevel gears 2.5 to 1 Minimum ratio for non-generated hypoid gears 3.5 to 1 Maximum gear pitch diameter (shafts at 90 degree) Face width ( maximum) 7/14” 11mm Number of teeth 5-200, except prime WORK SPINDLE Diameter of taper bore,large end 1 17/32” Taper ½” /ft Depth of taper 3” Diameter of hole through spindle ¾” CUTTER DIAMETER 1.1”, 1.5”, 2”, 2.75” 3.5” 28mm, 38mm, 51mm,     70mm, 89mm WORK HEAD SETTINGS Maximum offset above centre 1” 29mm Maximum offset below centre 1” 29mm Max distance from machine centre to nose of spindle 5.0” 127mm Min distance from machine centre to nose of spindle 1 ¼” 32m Machines are equipped with the following: 1-set-up of change gears for one part 1-cam 1-set of manuals Electrical Diagrams Misc tooling This machines can be inspected under power in customers facility prior to removal in good running condition. Contact us today to see machine prior to removal or request formal quote At WWW.PiselliEnt.com