SHARP Precision Lathe Model 1340VS 13" x 40" Digital Variable Speed (2 step) 3 HP 1.6" bore “New Sharp 1340VS Digital Variable Speed Precision Lathe has Digital Variable Speed in VS and V models allow easy change of spindle speed by dialing and it also operates on 3 phase or single phase power supply. Over-sized compound, apron and cross slide offer better cutting stability compared with similar size models available in F and V models.” Hardened and ground gears in headstock for long lasting wear Induction hardened and ground bed ways for smooth longitudinal movements Spindle supported by 2 high precision tapered roller bearings Carriage equipped with overload clutch to protect gears and screws Quick change totally enclosed gearbox offers wide range of threads Oil bath lube system keeps gears and shafts well lubricated Jog button for easy engagement of gears and inching of spindle rotation Gap bed allowing large work piece to be chucked when needed

规格参数

参数改为公制

回转直径	13"
顶尖间距	40"
主轴孔径	1.5625"
功率	3 hp
主轴转速	0 RPM
横拖板上最大回转直径	8.3125"
重量	1,550 lbs

配备

3-Jaw 8" Chuck D1-4 Camlock Spindle 1 -1/2" bore 7 - 5/8" Over Cross Slide Removable Gap Hardened and Ground Bed ways (Rockwell 50) Steady Rest Coolant System Full Length Splash Guard 4 Way Tool Post Tailstock Back Plate Foot Brake Thread Dial Center Sleeves Dead Centers Tool Kit OPTIONAL • 380V, 440V, 575V Transformer – 3HP 440T4 $ 825.00 NET • 4 - Jaw Chuck 8” (QU) 4J8D4 $ 600.00 • 4 - Jaw Chuck 10" (QU) 4J10D4 $ 700.00 • 3 - Jaw Chuck 8” (Bison) 803-0834 $ 1,225.00 • 4 - Jaw Chuck 8” (Bison) 853-0834 $ 1200.00 • Chuck Guard w/ Limit Switch 13/14-08 $ 380.00 • Follow Rest - for 1340VS ( capacity, 0.4” – 2.17”) 13V-07 $ 270.00 • Roller Jaws for steady rest, 3 pcs 13F-RJAW $ 315.00 • Taper Attachment - for 1440 ( factory installed) 13F-02 $ 2,330.00 • Aloris Quick Change Tool Holder Set 7 Pcs/HolderBXA-2511-7150 $ 1,730.00 Live Center - Royal (Dual Bearing) MT#3 10853 $ 330.00 • Live Center - MT#3 LC-MT3 $ 155.00 • Live Center with 7 Interchangeable Points 2575-4003 $ 485.00 • Drill Chuck & Arbor (JACOBS) 13/14-D/A $ 380.00 • Face Plate (12”) D1-4 Face-12-D4 $ 195.00 • 4-Way Carriage Stop - for 1440 13/14-01 $ 230.00 • Micrometer Carriage Stop - for 1340VS 13V-01 $ 230.00 • Halogen Work Light WL-24V70W $ 265.00 DIGITAL READ OUT SYSTEMS: • Fagor 20i D.R.O. FG-13VS $ 2005.00 • Fagor 40i D.R.O. FG-40i-13VS $ 3015.00 • Acu-Rite 200S D.R.O. AR-13VS $ 2,475.00 • Newall DP700 D.R.O. NWDP-13VS $ 2,790.00

规格表

Capacities: Swing Over Bed: 13″ Swing Over Cross Slide: 8-5/16″ Swing Over Gap: 18-1/2″ Width of Bed: 7-1/2″ Distance Between Centers: 40″ Headstock: Spindle Nose Type: D1-4 cam lock Spindle Bore: 1-9/16″ Spindle Speeds: 40 to 2,000 rpm (Vari) Taper of Spindle Bore: MT #5 Threads and Feeds Longitudinal Feeds – in/rev (40): 0.0016 – 0.046″ Cross Feed – in/rev (40): 0.0005 – 0.015″ Inch Threads (TPI): 2-56 (39) Metric Threads (mm): 0.5-12 (42) Lead Screw (Pitch, Diameter): 8 tpi, 1″ Carriage: Saddle Width: 12″ Apron Width: 11″ Cross Slide Width: 4-1/2″ Cross Slide Travel: 6-3/4″ Compound Rest Travel: 3-1/2″ Compound Width x Length: 3 x 7-1/2″ Bed: Bed Length: 64″ Bed Width: 7-1/2″ Tailstock: Quill Travel (graduated): 4″ Quill Diameter: 1-9/16″ Quill Taper: MT #3 General: Spindle Motor: 3 Horsepower Electrical: Single or 3 Phase Net Weight (approx.): 1,550 lbs