显示第1 - 50条型号信息,共 126
thumb

MAKINO A100E

The A100E provides a large workzone of 74.8” in diameter by 59.1” in height larger than other Makino horizontal machining centers. It is 20 percent heavier than any other Makino a-Series machine, w...

加工中心(卧式)
1 图片
thumb

MAKINO A120NX

加工中心(卧式)
1 图片
thumb

MAKINO A40

Introducing the Makino a40, a first-of-its-kind horizontal machining center purpose-designed and built to address the challenges of non-ferrous die cast parts production.

加工中心(卧式)
1 图片
thumb

MAKINO A500Z

Makino is excited to announce the newest addition to our family of high capability horizontal machining centers, the five axis a500Z. This versatile machine builds upon the industry leading perform...

加工中心(卧式)
1 图片
thumb

MAKINO A51NX

The Makino a51nx is a 400mm horizontal machining center that builds on the highly successful a51 platform with key high performance machining technologies that take productivity, accuracy and machi...

加工中心(卧式)
1 图片
thumb

MAKINO A51NX PRO 6

加工中心(卧式)
1 图片
thumb

MAKINO A51NX-5XU

Manufacturers of medical, aerospace, prototype and complex multi-face parts have long understood the advantages of 5-axis machining. Five-axis machining capability can improve productivity and qual...

加工中心(卧式)
1 图片
thumb

MAKINO A61NX

The a61nx is a 500mm, 40-taper production horizontal machining center. The a51nx and a61nx share key machine technologies that take part productivity, accuracy and machine reliability to the next l...

加工中心(卧式)
1 图片
thumb

MAKINO A61NX PRO 6

加工中心(卧式)
1 图片
thumb

MAKINO A61NX-5E

The a61nx-5E five-axis horizontal machining center is built specifically for high-efficiency aluminum machining of small to mid-size, complex five-axis components and monolithic aerospace parts. It...

加工中心(卧式)
1 图片
thumb

MAKINO A7

The A7 5-axis horizontal machining center is built specifically for high-efficiency machining of large, complex aluminum monolithic aerospace parts. Its design is based on the widely successful MAG...

加工中心(卧式)
1 图片
thumb

MAKINO a71

The a71 horizontal high-speed milling machine is rapidly becoming one of the most popular platforms for high-volume machining of parts made of cast iron and light alloys. Spindle integration with t...

加工中心(卧式)
1 图片
thumb

MAKINO A71NX

加工中心(卧式)
1 图片
thumb

MAKINO A81NX

Large Parts...Large Features The a81nx is Makino’s next generation 630mm horizontal machining center. It builds on the industry leading performance of its predecessor with new design elements foc...

加工中心(卧式)
1 图片
thumb

MAKINO a82

a82 for Large Part Machining The a82 HMC brings a new level of performance to large part machining, including diesel engine components or any large part requiring longer travel in the X-axis. Desi...

加工中心(卧式)
1 图片
thumb

MAKINO a82M

a82M HMC for Titanium Milling The a82M horizontal machining center is designed for milling tough, hard materials. It is ideally suited for large-diameter boring and face milling on materials such ...

加工中心(卧式)
1 图片
thumb

MAKINO A92

a92 HMC for Construction Equipment Manufacturing The a92 brings high-efficiency machining to large part production. Designed for unparalleled stiffness and rigidity, the a92 is the ideal machine p...

加工中心(卧式)
1 图片
thumb

MAKINO A99E

Ideally suited for manufacturing in the diesel engine block, transmission and semiconductor markets, the A99E accepts loads up to 4,400 lbs., with an optional upgrade to 6,600 lbs. (3,000 kg). A 40...

加工中心(卧式)
1 图片
thumb

MAKINO BX3

The Makino BX3 machine is purpose-built for the EDM Drilling demands of high volume production applications of cooling film hole features that are found in Blade and Vane turbine engine components....

电火花穿孔机
1 图片
thumb

MAKINO D200Z

D200Z design incorporates extreme speeds and precision for tighter tolerances and flawless blends and matches in complex 3-D contoured workpieces. From roughing to high-speed finishing of multifac...

加工中心(立式,五轴或以上)
2 图片
thumb

MAKINO D300

The D300 is designed to provide superior sustained dynamic accuracy in a five–axis configuration. Core-cooled ballscrews, temperature-controlled DD motors and spindle all combine to deliver therma...

加工中心(立式,五轴或以上)
1 图片
thumb

MAKINO D500

The D500 is designed to provide superior sustained dynamic accuracy. Makino Thermal Stabilizer technology isolates the machine from ever-changing shop conditions. Insulated castings, core-cooled ba...

加工中心(立式,五轴或以上)
1 图片
thumb

MAKINO D800Z/40

The D800Z is designed for high-performance job shops providing precision large part 5-axis machining for the die/mold and aerospace markets. Like the D300 and D500 machines, the D800Z offers easy a...

加工中心(立式,五轴或以上)
1 图片
thumb

MAKINO D800Z/50

The D800Z is designed for high-performance job shops providing precision large part 5-axis machining for the die/mold and aerospace markets. Like the D300 and D500 machines, the D800Z offers easy a...

加工中心(立式,五轴或以上)
1 图片
thumb

MAKINO DA300

The DA300 is inspired by the best design characteristics from both vertical and horizontal machine platforms to deliver the highest productive capabilities for multi – axis workpieces in the very s...

加工中心(立式,五轴或以上)
1 图片
thumb

MAKINO EDAC1

The world’s most accurate Ram EDM, Makino’s EDAC1, is capable of producing corner radii of 0.00019 inches (0.005mm) and surface finish quality of 0.000024 inches (0.6 micron) Ry. This machine achie...

电火花成形机床
1 图片
thumb

MAKINO EDAF2

The EDAF2 sinker EDM boasts a new mechanical design intended to increase rigidity and reduce thermal distortion, especially for machines installed in uncontrolled environments or used over the cour...

电火花成形机床
1 图片
thumb

MAKINO EDAF2-FH

Makino builds on the existing capabilities and features of its proven EDAF-Series sinker EDM machines by adding a special fine-hole machining configuration that is used to produce high-accuracy EDM...

电火花穿孔机
1 图片
thumb

MAKINO EDAF3

The EDAF3 sinker EDM boasts a new mechanical design intended to increase rigidity and reduce thermal distortion, especially for machines installed in uncontrolled environments or used over the cour...

电火花成形机床
1 图片
thumb

MAKINO EDAF3-FH

Makino builds on the existing capabilities and features of its proven EDAF-Series sinker EDM machines by adding a special fine-hole machining configuration that is used to produce high-accuracy EDM...

电火花穿孔机
1 图片
thumb

MAKINO EDBV3

The newly developed water-based EDBV3 (Electrical Discharge Blades and Vanes) machine has been specifically designed for blade and vane machining in the aerospace and power generation industries. T...

电火花穿孔机
1 图片
thumb

MAKINO EDBV8

The newly developed water-based EDBV8 (Electrical Discharge Blade and Vane) machine has been designed to produce the cooling and shaped diffuser holes for gas turbine engines for the Aerospace and ...

电火花穿孔机
1 图片
thumb

MAKINO EDFH-1

Makino now offers a high-accuracy fine-hole machining configuration on the ultra-precision EDAC-1 sinker EDM platform. The EDFH1 is a re-configured EDAC-1 machine that incorporates a fine-hole mach...

电火花穿孔机
1 图片
thumb

MAKINO EDGE2I

The EDGE2i machine brings an effective combination of high performance and versatility to Sink EDM operations. The EDGEi-Series machines are configured with many productive technologies to efficien...

电火花成形机床
1 图片
thumb

MAKINO EDGE3I

The advanced technologies and intelligent design of the EDGEi-Series machines deliver an unparalleled value, capability, and reliable productivity to Sinker EDM operations. The EDGE3i machine provi...

电火花成形机床
1 图片
thumb

MAKINO EDNC10

电火花成形机床
1 图片
thumb

MAKINO EDNC15

电火花成形机床
1 图片

MAKINO EDNC17

The EDNC17 offers the same utility and capability as the smaller EDNC15 machine, but provides larger X/Y strokes and a larger work tank area. Excellent access to the Work Zone is provided with the...

电火花成形机床
thumb

MAKINO EDNC20

电火花成形机床
1 图片
thumb

MAKINO EDNC21

电火花成形机床
1 图片
thumb

MAKINO EDNC6

电火花成形机床
1 图片
thumb

MAKINO EDNC8

电火花成形机床
1 图片
thumb

MAKINO F3

The new F3 vertical machining center is designed to provide stiffness and rigidity for chatter-free cutting, agility for high speed/hardmilling and accuracies for tight-tolerance blends and matches...

加工中心(立式)
1 图片
thumb

MAKINO F5

The F5 vertical machining center is designed to provide stiffness and rigidity for chatter-free cutting, agility for high speed/hardmilling and accuracies for tight-tolerance blends and matches typ...

加工中心(立式)
1 图片
thumb

MAKINO F5 PRO 6

The F5 Pro 6 vertical machining center is designed to provide stiffness and rigidity for chatter-free cutting, agility expected from a hard milling machine and accuracies for tight-tolerance blends...

加工中心(立式)
1 图片
thumb

MAKINO F5-5XR

The F5-5XR vertical machining center combines the speed, precision and flexibility required for tight-tolerance, 5-axis, hardmilling applications. Based upon the F5, the F5-5XR is an affordable 5-a...

加工中心(立式,五轴或以上)
1 图片
thumb

MAKINO F8

The F8 large, vertical machining center is designed to provide the power, speed, precision and versatility to attack both large production part applications as well as big die and mold components. ...

加工中心(立式)
1 图片
thumb

MAKINO F9

The F9 large, vertical machining center is designed to provide the power, speed, precision and versatility to attack both large production part applications as well as big die and mold components. ...

加工中心(立式)
1 图片
thumb

MAKINO FB127

The FB127 vertical machining center provides high-speed machining with superb accuracy, efficient chip removal and ease of operation, for long cycle time die/mold parts. The machine is equipped wit...

加工中心(立式)
1 图片
thumb

MAKINO G5

Today’s capital equipment must be more flexible and capable than ever. With this in mind, Makino has introduced the G5 CNC Grinder 5-axis horizontal machining center, capable of grinding, milling, ...

加工中心(卧式)
1 图片