BELOTTI CPT
The Water-jet cutting machine CPT Series is manufactured by Belotti SpA. This cutting machine is designed to maximize customers production. The measurement of the x axis ranges from 2 m to 4 m and...
BELOTTI FLU SERIES
BELOTTI GEMINI SERIES
Gemini series CNC machining centres are the result of Belotti S.p.a. long experience achieved in more than 30 years of activity in the production of machines for aluminum, composites materials and ...
BELOTTI MDL
The MDL series are advanced high-speed CNC 5-axis machining centers which ensure maximum productivity in machining of style models and prototypes, as well as in finishing of large-sized moulds and ...
BELOTTI NAVY SERIES
NAVY series consists of 5-axis advanced machining centers especially designed for shipyards specific needs. A wide range of models and cutting heads enable to meet any kind of dimensional and techn...
BELOTTI NOVA SERIES
The CNC machines in the NOVA series have durable monolithic structures featuring a double rail system on each baseframe side. This design allows for the highest amount of rigidity of the gantry dur...
BELOTTI SKY SERIES
The boost to innovation is the keystone of Belotti S.p.A.'s activity. All our CNC 5 axis machining centers are designed and built with the aim of increasing our Customers' productivity. With this i...
BELOTTI TRIM
Sturdy, accurate and absolutely reliable, the new TRIM series by Belotti S.p.A. is the show-piece of 5-axis machining centers dedicated to the trimming of plastics and composite materials. Like the...
BELOTTI TRIM WJ / FLA WJ / MDL WJ
Belotti presents TRIM WJ/FLA WJ/CB 2 machining centers. The large-sized systems have been designed for abrasive and pure-water applications with 5 axis. These are widely used in aeronautical, autom...
BELOTTI WING JET
The WING JET is a CNC water-jet cutting machine that is specifically designed to significantly minimize overall dimensions, enabling piece loading and unloading on its three sides. Designed in a ca...
EMAG CS ECM
The Comfort Standard is the best introduction to the automation of ECM (electro-chemical machining) processes. Modular machine concept Intelligent software and hardware interfaces Starting with ...
EMAG ELC 160
The ELC 160 is a modular laser welding machine that can be configured to suit a large variety of applications. At the heart of the laser welding machine ELC 160 is a 3-axis NC machining module. The...
EMAG ELC 200 H
The laser welding machine ELC 200 H is suitable for workpieces such as drive shafts, universal joint shafts, steering shafts and similar components. It allows for the use of lasers in applications ...
EMAG ELC 250 DUO
elc250 duo wb rgb The ELC 250 DUO is a highly efficient laser welding system for transmission components and other rotation-symmetric workpieces. This includes transmission components in hardened ...
EMAG HA 700 P
Combined assembly process with additional external or internal warming for stress-free and power-assisted joining. Force and distance-controlled process using NC joining modules.
EMAG PECM PT
In addition to the PTS series, EMAG offers the PT series with the following advantages: »»Machine base made of Mine raliT® polymer concrete »» Clamping surface: 800 x 450 x 660 mm (W x D x H) »»Mac...
EMAG PO 100 SF
This technology is a targeted refinement of the ECM process, where the gap between the workpiece and the tool through which the electrolyte solution flows is especially narrow. Simultaneously, the ...
EMAG PO 900 BF
EMAG ECM has two machine types for the different machining tasks of jet engine and turbine production: while the small PO 100 SF model is designed for machining turbine blades, the larger PO 900 B ...
EMAG PT 4000-3
Based on the PT system, the PT 4000-3 is fitted with an additional XY table. »» X-, Y- and Z-axes »» Clamping surface: 700 x 600 x 800 mm (W x D x H) »»Machining area size 1,900 x 2,000 mm (W x D) ...
EMAG PTS 2500
The EMAG PTS 2500 enables the highly precise integration of demanding geometries. The EMAG ECM and PECM technology applied here is an excellent option, even if many developers and design engineers ...
EMAG SFC 600
The thermal joining processes of EMAG are used to produce extremely precise components for powertrains. The process is also ideal for workpieces that will be subjected to high torques and dynamic l...
EMAG UBF 21/290
The tried and tested machining principle for stationary pipes ensures easy assembly of the machine components as well as the shortest possible idle times. The complete pipe end machining process – ...
EMAG UBF 21/560
The tried and tested machining principle for stationary pipes ensures easy assembly of the machine components as well as the shortest possible idle times. The complete pipe end machining process – ...
EMAG USC 21/190
The concept behind the USC 21 Pipe Threading Machine is a design special for the machining of pipe ends. It combines all the features prerequisite for quality, durability and productivity, with a f...
EMAG USC 21/260
The concept behind the USC 21 Pipe Threading Machine is a design special for the machining of pipe ends. It combines all the features prerequisite for quality, durability and productivity, with a f...
EMAG USC 21/290
The concept behind the USC 21 Pipe Threading Machine is a design special for the machining of pipe ends. It combines all the features prerequisite for quality, durability and productivity, with a f...
EMAG USC 21/450
The concept behind the USC 21 Pipe Threading Machine is a design special for the machining of pipe ends. It combines all the features prerequisite for quality, durability and productivity, with a f...
EMAG USC 21/560
The concept behind the USC 21 Pipe Threading Machine is a design special for the machining of pipe ends. It combines all the features prerequisite for quality, durability and productivity, with a f...
EMAG USC 27 290
The USC 27 horizontal coupling machine center for the machining of couplings and tool joints with a nominal diameter of 4 1/2 - 13 3/8" inches. The USC 27 center-drive lathe machine stands for eff...
EMAG USC 27 380
The USC 27 horizontal coupling machine center for the machining of couplings and tool joints with a nominal diameter of 4 1/2 - 13 3/8" inches. The USC 27 center-drive lathe machine stands for eff...
EMAG VA 700 P
High flexibility due to simple programming of joining force, path and speed. Support for stress-free or reduced stress joining / pressing thanks to integrated warming.
EMAG VA 700 T
The camshaft joining machine VA 700 T features our patented thermal, stress-free joining process combining precision and flexibility for the heat shrinking of components (cams, bearing rings, senso...
EMAG VL 1 TWIN
EMAG VL 2
Three axes + turret with up to twelve driven tools + automation. The basic VL 2 machine, a three-axis vertical chuck turning machine, catches the eye due to its design. Its basis is the machine bo...
EMAG VL 2 DUO LINE
The VL 2 modular vertical turning center provides the ideal machine base for the VL 2 DUO line, perfect for the manufacturing of chucked parts up to 100 mm in diameter. The vertical turning centers...
EMAG VL 200 GT
EMAG VL 3
Every VL 3 is a vertical lathe with integrated loading and unloading system. A recirculating conveyor belt conveys the workpieces in their carrier prisms to the pick-up station located behind the m...
EMAG VL 3 DUO
The VL 3 DUO turning machines combine the technological developments of recent years, including pick-up automation and the TrackMotion automation system, to the modular basic design of the cnc mach...
EMAG VL 4
The modular concept of the VL 4 makes it all possible: the vertical turning machine can be equipped to suit a variety of applications. It is compact in design yet powerful and features an integrate...
EMAG VL 4 DUO LINE
The VL 4 CNC turning center with integrated pick-up automation is a vertical turning center for productive manufacturing of chucked parts up to 200 mm in diameter, e.g. flange parts. The machining...
EMAG VL 4 H
The VL 4 H vertical gear hobbing machine is one of EMAG’s modular machines offering reliable quality based on the latest technology. The machine’s body is made of MINERALT® polymer concrete, which ...
EMAG VL 5I
Well-engineered components, high quality standards and an exceptional price-performance ratio are included in the VL 5i lathe package. The VL 5ilathe achieves its optimal efficiency rating by offer...
EMAG VL 6
The VL 6 vertical lathe machine offers the same features as the newest EMAG modular designs in a vertical turning machine for larger, heavy workpieces. Equipped with a standard workpiece conveyor a...
EMAG VL 6 DUO LINE
The TrackMotion automation system developed by EMAG has been perfectly adapted to the special requirements of serial production and the design of modular CNC turning centers. The TransLift CNC gr...
EMAG VL 7
The use of well-proven machine modules makes if possible for EMAG to deliver the VL 7 CNC Lathe within just a few weeks. This enables in particular job shops and sub-suppliers to find the right bal...
EMAG VL 8
The cornerstone of the VL 8 turning machine is a machine base of MINERALIT® polymer concrete that guarantees a vibration resistant process, providing for excellent tool life and outstanding machini...
EMAG VL 8 DUO LINE
VL 8 CNC turning centers allow the automated and productive manufacturing of large and heavy components up to 400 mm in diameter. The machines are equipped with a FANUC or Siemens control unit. In ...
EMAG VLC 100
The machines of the VLC 100 series are characterized by their sturdy machine design, dynamic axes and simple operation. Each machine is individually tailored to meet customer demands, thus creating...