3M 18700
3M 19000
3M 200A
3M 256-02-00
Ideal respiratory protection from airborne particulates The 3M™ Portable Compressed Air Filter and Regulator Panel 256-02-00 can filter and regulate air delivered to your supplied air respirator. ...
3M 407BG
3M 4100
3M 532
3M 700A
3M 7200
Used with water-based floor finish stripping solutions to remove old soiled floor finishes and sealers *Certified by Green Seal® for Environmental Innovation based on a design for significantly im...
3M 785C
Ceramic/aluminum oxide abrasive blend self-sharpens yielding high cut rates and increased durability Stiff fiber backing provides the durability needed for weld removal and other medium pressure a...
3M 800AF
3M-Matic™ Case Sealer 800af with 3M™ AccuGlide™ 3 Taping Head seals both top and bottom center seams of regular slotted containers without the need for an operator. It automatically folds the top f...
3M 800RF
3M 81471
Provides the most aggressive cutting action in the Finesse-it line for fast removal of sanding scratches in conjunction with 3M™Finesse-it™ polishes Dense natural pile conforms to contours for eve...
3M A20
3M HVA-6
3M W200
Electric water-activated tape dispenser is easy to use Heated water reservoir speeds tape activation Dispenses a pre-set length of water-activated tape for accurate and consistent tape distribution
AAF ARRESTALL
The ArrestAll® dust collector is a compact and efficient solution to small and medium volume dry dust problems. Designed to control dust from a single source or system, the ArrestAll® saves energy ...
AAF CY16-2
The Cyclone® can be used in almost any application that generates dust particles greater than 20 microns in diameter. Use the Cyclone® as your primary collector with or without the optional after-f...
AAF CY20-3
The Cyclone® can be used in almost any application that generates dust particles greater than 20 microns in diameter. Use the Cyclone® as your primary collector with or without the optional after-f...
AAF CY20-5
The Cyclone® can be used in almost any application that generates dust particles greater than 20 microns in diameter. Use the Cyclone® as your primary collector with or without the optional after-f...
AAF CY24-7.5
The Cyclone® can be used in almost any application that generates dust particles greater than 20 microns in diameter. Use the Cyclone® as your primary collector with or without the optional after-f...
AAF CY30-15
The Cyclone® can be used in almost any application that generates dust particles greater than 20 microns in diameter. Use the Cyclone® as your primary collector with or without the optional after-f...
AAF CY36-25
The Cyclone® can be used in almost any application that generates dust particles greater than 20 microns in diameter. Use the Cyclone® as your primary collector with or without the optional after-f...
AAF CY36-30
The Cyclone® can be used in almost any application that generates dust particles greater than 20 microns in diameter. Use the Cyclone® as your primary collector with or without the optional after-f...
AAF CY44-40
The Cyclone® can be used in almost any application that generates dust particles greater than 20 microns in diameter. Use the Cyclone® as your primary collector with or without the optional after-f...
AAF CY44-50
The Cyclone® can be used in almost any application that generates dust particles greater than 20 microns in diameter. Use the Cyclone® as your primary collector with or without the optional after-f...
AAF DYNAMIST 12M
The AAF DynaMist™ M for mist collection system is designed for light 20 mg/m3. Packaged units are available from 400 to 3,600 CFM with direct drive centrifugal fan packages.
AAF DYNAMIST 12S
The AAF DynaMist™ M for mist collection system is designed for light 20 mg/m3. Packaged units are available from 400 to 3,600 CFM with direct drive centrifugal fan packages.
AAF DYNAMIST 18S
The AAF DynaMist™ M for mist collection system is designed for light 20 mg/m3. Packaged units are available from 400 to 3,600 CFM with direct drive centrifugal fan packages.
AAF DYNAMIST 24M
The AAF DynaMist™ M for mist collection system is designed for light 20 mg/m3. Packaged units are available from 400 to 3,600 CFM with direct drive centrifugal fan packages.
AAF DYNAMIST 24S
The AAF DynaMist™ M for mist collection system is designed for light 20 mg/m3. Packaged units are available from 400 to 3,600 CFM with direct drive centrifugal fan packages.
AAF DYNAMIST 36M
The AAF DynaMist™ M for mist collection system is designed for light 20 mg/m3. Packaged units are available from 400 to 3,600 CFM with direct drive centrifugal fan packages.
AAF DYNAMIST 3SC
The AAF DynaMist™ M for mist collection system is designed for light 20 mg/m3. Packaged units are available from 400 to 3,600 CFM with direct drive centrifugal fan packages.
AAF DYNAMIST 4M
The AAF DynaMist™ M for mist collection system is designed for light 20 mg/m3. Packaged units are available from 400 to 3,600 CFM with direct drive centrifugal fan packages.
AAF DYNAMIST 6M
The AAF DynaMist™ M for mist collection system is designed for light 20 mg/m3. Packaged units are available from 400 to 3,600 CFM with direct drive centrifugal fan packages.
AAF DYNAMIST 6MC
The AAF DynaMist™ M for mist collection system is designed for light 20 mg/m3. Packaged units are available from 400 to 3,600 CFM with direct drive centrifugal fan packages.
AAF DYNAMIST 6S
The AAF DynaMist™ M for mist collection system is designed for light 20 mg/m3. Packaged units are available from 400 to 3,600 CFM with direct drive centrifugal fan packages.
AAF DYNAPURE A-1
Designed for vertical mounting, the DynaPure® Model A-1 Mist Collector is ideal for gear box vents on air compressors, vacuum pumps or any machine with an oil reservoir which gives off mist as a re...
AAF FABRIPULSE BV
The FabriPulse BV provides excellent filtration at collection points such as silos and bins. Installation is easy and our top loading design requires little maintenance after installation.
AAF FABRIPULSE FUSION
The FabriPulse® Fusion is the optimum bag collector to solve a variety of air quality problems and can be tailored to specific application requirements. It can be used as an integral part of proces...
AAF FABRIPULSE M
The FabriPulse® M pulse-jet collector meets the needs of industrial dust collection applications that have low air volume and require small, compact filter sizes. It is engineered to give years of ...
AAF OPTIFLO RC
The OptiFlo® RC cartridge collector is the optimum solution to a wide variety of air quality problems. The OptiFlo® RC can be used in several industries including industrial processes, chemical, f...
AAF PULSE-PAK PRIME
The PulsePak® Prime pulse-jet cartridge dust collector is designed to meet today’s high efficiency and compact size requirements for in-plant recirculation installations.
AAF ROTOCLONE DOWNVENT
The new RotoClone® DownVent offers superior quality with AAF wet collection technology. Features include a powerful LED work light and adjustable tool shelves to maximize productivity. The unit is...
AAF ROTOCLONE LVN
The RotoClone® LVN collector was patterned after the standard RotoClone® N collector, which has been installed in thousands of applications since its introduction in the 1940s. It is an efficient, ...
AAF ROTOCLONE N
The RotoClone® N combines high efficiency, low maintenance costs, simplicity, flexibility and low water usage to maximize performance. The RotoClone® N has solved thousands of dust collection probl...
AAF ROTOCLONE W
The RotoClone® W is the most cost effective, high-efficiency wet dust collector in its class. Combining a dust collector with a centrifugal fan, saving space and enhancing its suitable for a wide v...