GUZZETTI TEV2000
ITL INDUSTRIES H.R.SLITTERS-2000
JFMI JSL-12X2000
JFMI JSL-8X2000
KINGJIME KJS-2X2000
KINGJIME KJS-3X2000
KINGJIME KJS-6X2000
VULMAC VS-8×2000
XUANHONG XH1250ZS6
ZHONGHUI ZJ2000
ZMM POBEDA SLITTER 2000MM
LASA SL
Lineas de corte longitudinal de bobina para la obtención de otras de ancho menor. Bobinas hasta 30 Ton y 2.000mm de diámetro con chapas de 0,2 a 15 mm de espesor y ancho hasta 2.100mm. Materiales...
LASA SLMD
Lineas de corte longitudinal para la obtención de otras de ancho menor. Bobinas hasta 30 Ton y 2.000mm de diámetro con chapas de 0,2 a 13 mm de espesor y ancho hasta 2.100mm. Materiales:, Inoxidabl...
GARY 4000
JFMI JSL-16X2150
SACMA HEAVY GAUGE
These slitters are for large thickness, in the range from 6 till 20 mm included, and the speed can reach 150 m/min. With this solution, SACMA fills the processing of coils till 45ton and width from...
SACMA MEDIUM GAUGE
These slitters are developed for the cutting of thin-medium thickness, in the range from 0,3 till 6 mm included and the speed can reach 300 m/min. With this solution, SACMA fills the processing of ...
HONG JIA CIMG2426
VULMAC VS-10×2200
VULMAC VS-12×2200
AOGANG ZJ2200
ACHENBACH OPTIFOIL HEAVYSLIT
The robust Achenbach OPTIFOIL® HeavySlit foil slitting machine processes aluminium as well as copper and brass metal foils with a wide range of thickness into large-diameter rolls. With high produc...
YAWEI T44S
AOGANG ZJ2500
ACHENBACH JUMBOSLIT
ACHENBACH OPTIFOIL DOUBLER
Achenbach OPTIFOIL® doublers consist mainly of two coil deposits for material access, a cart, two unwinding stands, a roller bridge with a material feed device, a spray unit with suction for separa...
VULMAC TQ-44K
VULMAC VS-16×2500
VULMAC VS-20×2500
EUROSLITTER SLITTING LINES
The project criterions for our slitting line, not consider only the elevated speed of production (up to 400 m/min) but also and above the whole reduction of the production dead times. Our productio...
ATM DCU-1200
Model DCU-1200 Thickness 1.2 Effective width φ200-φ1200 Motor 0.75 Weight 230 Size(L.W.H) 2340×340×1160
L-TEC SM-10
The SM-10 represents more than half a century of experience in the development, design, and production of a wide range of gas apparatus. It is a versatile, heavy-duty machine for the cutting of sc...
L-TEC SM-8
The SM-8 Cutting Machine is designed for in-line cutting of billets, blooms and slabs. This machine is an adaptation of the SM-10 and uses the same tubular and vertical drives. The machine is mo...
