10 x 24 LANDIS CH UNIVERSAL CYLINDRICAL GRINDER S/N 409 20 Year: 1951 STANDARD CATALOG SPECIFICATIONS Nominal work swings............................. 10 Nominal distances between work centers.......... 24 Maximum work swing diameter standard machine will grind with full size standard wheel....................... 10 31/32 Minimum diameter wheel to grind zero diameter work on centers........................................ 9 Degrees Coolant tank capacity, gallons.................. 28 Hydraulic tank capacity, gallons................ 25 1/2 Height from floor to work centerline............ 42 WORK CARRIAGE Traverse speed, inches per minute............... 2 to 240 Traverse per turn of hand wheel slow.......... 0.100 fast.......... 1.000 Center rest capacity............................ 1/4 2 Work rest capacity.............................. 1/4 4 WHEEL HEAD WHEEL FEED Grinding wheel size............................. 12 x 1 x 5 Grinding wheel head swivel range upper........ 180 Deg. - lower........ 60 Deg. CW 30 Deg. CCW Grinding wheel spindle speeds, RPM.............. 2005 2533 Automatic infeed at table reversal on dia...... 0.0002 to 0.004 Maximum distance wheel centerline to work centerline......................................... 10 15 1/2 Minimum distance wheel centerline to work centerline......................................... 1 1/2 Work diameter reduction per revolution of hand wheel......................................... 0.100 Work diameter reduction per revolution of fine feed knob (Hydraulic Infeed Machines)....................... 0.001 Maximum hydraulic feed on diameter for hydraulic infeed machines.......................................... 0.090 Rapid infeed stroke for hydraulic infeed machines.......................................... 1 1/2 Internal spindle speed, RPM........................ 18,000 HEAD STOCK FOOT STOCK Head stock work center............................. #10 Jarno Foot stock work center............................. # 6 Jarno Foot stock center movement by...................... Lever only Work speeds RPM Low Range........................ 30 to 150 High Range....................... 120 to 600 Diameter hole through head stock spindle........... 1 Head stock swivel range............................ 120 Degrees Head stock spindle nose............................ 5A 2 LENGTHS BETWEEN CENTERS 24 Swivel table graduated, inches per foot............ 4 1/2 Swivel table graduated, degrees included angle..... 20 Degrees ELECTRIC MOTORS Wheel drive motor.................................. 2 HP Work drive motor................................... 1/3 HP Hydraulic oil pump generator drive motor......... 1/4 HP Internal fixture motor............................. 1 HP Wheel spindle lubrication pump motor............... 1/4 HP EQUIPMENT FEATURES Swing down internal grinding attachment. Head stock, 2 speeds. Hydraulic table travel. L-R Tarry. Live spindle. Pick feed L-R. Specifications are deemed accurate, however, subject to verification or prior sale. All exchangeunits/returns must be shipped within 30 days. All exchange units/returns mustbe shipped using DDP terms - Grinders Clearing House, Inc. dba GCH Machinery,is not responsible for any customs formalities or shipping costs. If Grinders ClearingHouse, Inc. dba GCH Machinery does not receive exchange/core unit back within30 days, GCH will invoice FULL replacement cost (OUTRIGHT Cost) to customer.