To the best of our knowledge all details listed below are deemed correct. It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase. Specifications: Control: Fanuc 32-iB Machining Range: Chucking Barstock Diameter: ø32 mm (1.26 in.) Machining Length: 330 mm (12.99 in.) (Direct-Drive Guide Bushing) 70 mm (2.76 in.) (Chucker Mode)) Drilling Diameter: ø12 mm (.47 in.) Tapping Diameter: M10 Back Spindle Chucking Barstock Diameter: ø32 mm (1.26 in.) Back Spindle Drilling Diameter: ø10 mm (.39 in.) Back Spindle Tapping Diameter: M8 Tool Spindle Drilling Diameter: ø8 mm (.31 in.) Tool Spindle Tapping Diameter: M6 Tool Spindle Slotting Cutter Diameter: ø45 mm (1.77 in.) Machine Capability Main Spindle Speed: 8,000 / min-1 Back Spindle Speed: 8,000 / min-1 Tool Spindle Speed: 6,000 / min-1 Total Tool Number: 34 Tool Size: .625" x 3.94" (square) / 25 mm (round) Rapid Traverse Rate: 35 m/min (105 ft/min) [(X1, Y1, Y2: 24 m/min (78.74 ft/min)] Spindle Index: C1 Axis and C2 Axis Motors Main Spindle: 3.7/5.5 kW Back Spindle: 3.7/5.5 kW Cross Drill of Front Tool Post: 1.0 kW Cross Drill of Rear Tool Post Drive: 1.4 kW Rotary Tool of Back Tool Post: 1.4 kW Rotary Guide Bushing: 1.5 kW Z1, Y1, X2, Z2: .75 kW X1, Y2: .5 kW Coolant Pump: .4 kW Lubricating Pump: 3 W Others Compressed air requirement: .4 MPa or more Air discharge rate: 100 NL/min Power Source Requirements: 16.8 KVA Coolant Tank Capacity: 260 L Machine Dimensions: 103.5” x 50.4” x 77.5” Machine Weight: 8,818 lbs.