Gleason Straight Bevel Coniflex Gear Generator Model 104 s/n 29296 Partially Rebuilt Machine will be delivered in Excellent working condition This machine Has been gone through by our technician. we are Rebuilding machine with new roller cam along with other items on this machine. the work will be completed and can be viewed under power when complete. PO required and down payment needed to hold machine ! general machine specifications are below. Contact us for a full report on work completed on this machine CATALOG SPECIFICATIONS: CONE DISTANCE(MAXIMUM)................. 4.25" (108MM) CONE DISTANCE(MINIMUM)................. 0"(0MM) PITCH ANGLE(MAXIMUM) 90 DEGREES........ 84DEGREES 18 MIN PITCH ANGLE(MINIMUM)................... 5 DEGREES 42 MIN EXTREME ANGLE (MINIMUM)................ 10:1 PITCH DIAMETER (MAXIMUM) RATIO 10:1.... 8.5" (216MM) PITCH DIAMETER RATIO 1:1............... 6" DIAMETRAL PITCH(COARSEST).............. 3DP (8.5 MODULE) DIAMETRAL PITCH(FINEST)................ 20 DP (1.3 MODULE) PITCH DIAMETER (MINIMUM) RATIO 1:1..... 6" (152MM) DIAMETRAL PITCH (COARSEST)............. 3DP (8.5 MODULE) DIAMETRAL PITCH (FINEST)............... 20 DP (1.3 MODULE) FACE WIDTH (MINIMUM)................... 1-3/8" (35MM) INDEX RANGE....................... 9-93 INCLUSIVE & MOST NO. S TO M175 PRESSURE ANGLES (DEGREES).............. 22,22.5,25 DEGREES WORK SPINDLE TAPER HOLE (LARGE END).... 3-39/22" (100MM) WORK SPINDLE TAPER PER FT.............. 39/64" (15MM) DEPTH OF TAPER......................... 6" SPINDLE HOLE DIAMETER THRU-BORE........ 2-7/16" (62MM) SPINDLE NOSE TO MACHINE CENTER................................. 1-1/2" TO 9" (3831-228.6MM) CUTTER SPEEDS (FEET PER MIN)........... 98 TO 286 FEEDS (SECONDS PER TOOTH).............. 4.2 TO 69.2 MAIN MOTOR............................. 5HP 1800 RPM HYDRAULIC PUMP MOTOR................... .75HP 1800RPM COOLANT PUMP MOTOR..................... .5HP 3600RPM FLOOR SPACE............................ 61.25"X84.25" (1556X2140MM) MACHINE NET WEIGHT..................... 14,500 LBS (6.591 KGS) Machine is equipped with the following 1 set up of change gears presently 0 the machine 1 set of cutter bodies for the machine machine guarding (not photographed but included) manual for operating machine and electrical drawings contact us today as this machine will not last !! This machine is being rebuilt and it will be available for sale shortly ,it is being rebuilt by our technicians in our Statesville NC facitlity. A complete work up of repairs done to this machine is available upon request and full disclosure of work completed is available for review upon inspection. Call us to discuss an inspection or schedule a visit, go to WWW.PiselliEnt.com for more photos and/ or information on this or other machine options