12" chuck, chip conveyor, tool presetter, tailstock, cycle time: 4637 hrs

Haas ST-30 2 Axis CNC Lathe (2014) SPECIFICATIONS: SIZE 12" Chuck SWING 31.75" MACHINING LENGTH 26" CHUCK SIZE 12" BAR CAPACITY 3" POWER 30 hp MAX RPM 3,400 RPM TURNING DIA 21" TAILSTOCK Yes Haas ST-30 2 Axis CNC Lathe (2012) Capacities S.A.E METRIC Chuck Size 10.0 in 254 mm Max Part Swing 21.0 in 533 mm Max Cutting Diameter (with BOT turret) 15.00 in 381 mm Max Cutting Diameter (with BMT65 turret) 13.75 in 349 mm Max Cutting Length (varies with workholding) 32.5 in 826 mm Bar Capacity 3.00 in 76 mm Between Centers 32.5 in 826 mm Travels S.A.E METRIC X Axis 9.40 in 239 mm Z Axis 32.50 in 826 mm Feedrates S.A.E METRIC Rapids on X 945 ipm 24.0 m/min Rapids on Z 945 ipm 24.0 m/min Axis Motors S.A.E METRIC Max Thrust X 4100 lbf 18238 N Max Thrust Z 5100 lbf 22686 N Spindle S.A.E METRIC Spindle Nose A2-6 A2-6 Max Rating 30.0 hp 22.4 kW Max Speed 3400 rpm 3400 rpm Max Torque 300.0 ft-lbf @ 500 rpm 407.0 Nm @ 500 rpm Max Torque w/opt Gearbox 1000 ft-lbf @ 150 rpm 1356 Nm @ 150 rpm Spindle Bore ø 3.50 in 88.9 mm Sub-Spindle S.A.E METRIC Chuck Size 6.5 in 165 mm Spindle Nose A2-5 A2-5 Max Speed 4100 rpm 4100 rpm Max Sync Speed w/Main Spindle 4100 rpm 4100 rpm Chuck Throat Ø 1.81 in x 1.60 in DEEP Ø 46.0 mm x 40.6 mm DEEP Drawbar Adapter Bore Ø 1.81 in x 3.09 in DEEP Ø 46.0 mm x 78.5 mm DEEP Drawbar Bore (non-through) Ø 1.03 in x 4.91 in DEEP Ø 26.2 mm x 124.7 mm DEEP Spindle Bore (without chuck and drawbar installed) 2.31 in 58.7 mm Integrated Brake Torque 17 ft-lbf 23 N/m Spindle Orientation Accuracy (Requires SO) ± 0.02 ° ± 0.02 ° Rapids (B-axis) 400 ipm 10 m/min Turret S.A.E METRIC Number of Tools 12-Station BOT 12-Station BOT OD vs ID Tools Any Combination (will vary with turret) Any Combination (will vary with turret) Boring Bar Rear Clearance (from back of turret ) 4.00 in 102.0 mm General S.A.E METRIC Coolant Capacity 55 gal 208 L Air Requirements S.A.E METRIC Air Required 4 scfm @ 100 psi 113 L/min @ 6.9 bar Inline Air Hose 3/8 in 3/8 in Coupler (Air) 3/8 in 3/8 in Air Pressure Min 80 psi 5.5 bar Electrical Specification S.A.E METRIC Spindle Speed 3400 rpm 3400 rpm Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive Spindle Power 30.0 hp 22.4 kW Input AC Voltage (3 Phase) - Low 220 VAC 220 VAC Full Load Amps (3 Phase) - Low 70 A 70 A Input AC Voltage (3 Phase) - High* 440 VAC 440 VAC Full Load Amps (3 Phase) - High* 35 A 35 A Dimensions - Shipping S.A.E METRIC Domestic Pallet 171.0 in x 90.0 in x 98.0 in 435 cm x 229 cm x 249 cm Export Pallet 171.0 in x 90.0 in x 98.0 in 435 cm x 229 cm x 249 cm Weight 10900 lb 4944.0 kg