Yatak Tipi MillsANAYAK HVM 11000 DUO
Gelderland, Hollandagenel bakış
Marka
model
kimlik numarası
604793
Durum
Kullanılmış - Mükemmel
Yıl
2000
Yer
Gelderland
Hollanda
Hollanda
İade Politikası
olduğu gibi
Stok #
8622
Metrik Özellikleri dönüştürme
Tablo-W | 129.92" |
Tablo-L | 472.44" |
#Axis (#Eksen) | 3 |
Hareket (Gidiş)- Uzunlama | 405.51" |
Hareket (Gidiş)- Çaprazlama | 78.74" |
Güç | 40.2 hp |
RPM (Dönüş Sayısı/Dakika) | 3,000 RPM |
Konik | ISO 50 |
CNC Kontrol | CNC (HeidenHain TNC 430) |
İle donatılmış
Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles.
Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines
Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases
One sole operator can control the DUPLEX milling machines
Reduced space and investment requirement comparing with two single machines
Fast investment amortisation due to the high productivity
Duplex solution admits different configurations: single working area, pendulum working areas
For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo
X-Axis: 10300mm
Y-Axis: 2000mm
Z-Axis: 1800mm
Table Length: 12000mm
Table Width: 3300mm
Table load: 100000
Power on spindle: 22/30kW
Spindle speeds: 60 - 3000Rpm
Spindle Taper: 50ISO/Bt/Mk
Feed rate X-Axis: 10000mm/min.
Feed rate Y-Axis: 10000mm/min.
Feed rate Z-Axis: 10000mm/min.
Millinghead auto-index:2.5 x 2.5°
Working hours: 25000H
Length: 21200mm
Width: 10000mm
Height: 4875mm
Weight: 100000kg
www.mach4metal.com
spec Sheet
Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles.
Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines
Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases
One sole operator can control the DUPLEX milling machines
Reduced space and investment requirement comparing with two single machines
Fast investment amortisation due to the high productivity
Duplex solution admits different configurations: single working area, pendulum working areas
For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo
X-Axis: 10300mm
Y-Axis: 2000mm
Z-Axis: 1800mm
Table Length: 12000mm
Table Width: 3300mm
Table load: 100000
Power on spindle: 22/30kW
Spindle speeds: 60 - 3000Rpm
Spindle Taper: 50ISO/Bt/Mk
Feed rate X-Axis: 10000mm/min.
Feed rate Y-Axis: 10000mm/min.
Feed rate Z-Axis: 10000mm/min.
Millinghead auto-index:2.5 x 2.5°
Working hours: 25000H
Length: 21200mm
Width: 10000mm
Height: 4875mm
Weight: 100000kg
www.mach4metal.com
Bu Tip fazla listeleri gör
Hepsini görBu Brand daha bakın listeleri
ANAYAK HMV5000-P MACHINING CENTER
Dik işleme merkezleri
ANAYAK HVM-5000
Yatak Tipi Mills
ANAYAK HVM-5000
Yatak Tipi Mills
ANAYAK HVM 11000
Yatak Tipi Mills