LATHES, CNC, COMBINATION, 3-AXIS OR MORE 2004 Okuma LT200-MY Twin Star, Machine # 8993 Swing: 15.75" Swing over cross slide: 12.2" Maximum cutting diameter: 8.27" Maximum turning length: 21.26" Distance between spindles: 37.80" Speed Range: 45 - 4,500 RPM Spindle bore: 2.44" Bar Capacity: 2" Spindle nose: A2-6 Main spindle motor (0 min /. Continuous): 15 / 10 hp X-axis (upper / lower): 7.56" / 7.56" Z-axis (upper / lower): 27.561" / 27.561" Y-Axis (upper / lower): +/- 3.62" Turret tool positions upper turret (all live): 12 Turret tool positions lower turret (all live): 12 B-Axis travel (sub-spindle): 28.74" Rotary tool speed: 50 - 6,000 RPM Rotary tool motor (upper and lower): 5.4 hp Rapid traverse (X / Z / Y): 1181 / 1574 / 1024 IPM Sub-spindle rapid traverse: 1,574 IPM Weight: 16,000 Lbs Length (not including the chip conveyor): 105" Width: 79" Heght: 85" Transformer Height (Sits on top of the machine): 16" Chip Conveyor extenbsion beyond end of machine: 56" / 69" Tall Chip Pan Width: 56" OSP E-100L CNC with RS-232C port Assorted live and statc tool holders Parts Catcher Assorted spindle liners Transformer (480 Volts) ATS Collet Chuck on Main & Sub-Spindles Auto Touchsetter Barfeed Interface User Task II Parts Ejector Synchronous Tapping Helical Cutting Thermal Compensation Lap 4 Nose Radius Compensation Auto Chamfering 3D Animation Spindle Orientation Torque Limiiter Tool Life Management Tool Wear Compensation Built new in November, 2004 - Substantially refurbished in 2017 Bar Feeder is not included Copies of repair descriptions can be provided on request With the new Z B axis all guides have been replaced https://rumble.com/v3wdov2-okuma-lt200-my-twin-star.html Installed new ZA Axis Linear Guidies and Ways Installed new linear ways on Y, XA, & XB axes. New Wipers including door wipers. Two new pumps, New door interlock switch Replaced the ZB Linear Guides