BAILEIGH BP-9078NC Abkant Pres

Özellikler

Item Number	BP-9078NC

Back Gauge Length	17144

Return Speed	2.36″ / sec.

Motor	10 hp

Oil Capacity	45 gal

Included Accesories	Included Accesories

Throat Depth	7.87″

Stroke Distance	5.9″

Table Width	6.29″

Approach Speed	3.14″ / sec.

Back Gauge Motor	1/2 hp

Bed Length	17145

Bending Speed	.236″ / sec

Maximum Capacity	90 tons

Distance Between Housings	61″

Distance From Table To Ram	11.81″

Power	220V / 3-phase

Shipping Weight	8800lbs

Shipping Dimensions (Inches)	103x85x100
Delivers up to 90 tons of pressure.

Bends sheet metal up to 78” wide.

10 hp main motor runs on 220-volt 3-phase power.
POWERFUL, EASY-TO-USE HYDRAULIC SYSTEM

Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.

2 encoder-controlled hydraulic cylinders move the top beam.

Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.

It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel).

You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend won’t lose its shape.

2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam.

Foot pedal brings the stroke up and down, leaving your hands free to position the material.

Motorized back gauge rides on a solid ball screw trolley mechanism.

Back gauge encoder shows its position on its own DRO.

Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine.
RIGID STRUCTURE AND LOW MAINTENANCE

Heavy electrowelded frame, made of solid steel, enables this press brake to stay accurate and run smoothly in production for many years.

Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke.

Includes a set of hardened single-Vee American tooling.

Accepts standard press brake tooling, giving you a wide variety of options.

Comes with front material rests (or support arms), which some competing machines do not include.

6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam.

4 grease zerks let you add oil every few months.

Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months.

Fotoğraflar