Motor TornaSTANKO 1M635
Texas, Birleşik Devletlergenel bakış
Marka
model
kimlik numarası
577753
tip
Durum
Kullanılmış - İyi
Yıl
1990
seri numarası
3719
Yer
Texas
Birleşik Devletler
Birleşik Devletler
Stok #
L3000338
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
Metrik Özellikleri dönüştürme
Salınım | 27" |
Çapraz Sürgü Üzerinde Salınım | 14.1" |
Merkezler | 118" |
Mil Göbek Deliği | 3.125" |
RPM (Dönüş Sayısı/Dakika) | 1,250 RPM |
Güç | 20 hp |
Ölçüler | R-L 226" X F-B 72" X Height 62" |
Ağırlk | 12,584 Lbs. |
spec Sheet
Swing Over Bed Ways.................................27.56"
Swing Over Cross Slide..............................14.1"
Cross Slide Travel..................................15.75"
Swing In Gap........................................35.43" X 17.72" Long
Compound Travel.....................................8.6"
Compound Swivel.....................................+/- 90 Degrees
Center Distance.....................................118"
Weight Between Center...............................7,700 Lbs.
Spindle Hole........................................3-1/8"
Spindle Speeds......................................10 To 1,250 Rpm's
Spindle Nose........................................A1-11
New Gator...........................................16"3-Jaw Chuck With 2 Piece Jaws
New Gator...........................................20" 4-Jaw Chuck With 2 Piece Jaws
Feeds Compound......................................0007 To .017
Feeds Cross Slide...................................0.001 To .20
Feeds Carriage......................................0.0024 To .05
Threads Inch........................................1/4 To 28 TPI
Threads Metric......................................1 To 224 MM
Tail Stock Quill Diameter...........................3-1/2"
Tail Stock Quill Travel.............................9.4"
Tail Stock Taper....................................#6 Morse
Maine Motor.........................................20.4 Hp.
Floor Space.........................................R-L 226" X F-B 72"
Machine Height......................................62"
Weight..............................................12,584 Lbs.
Coolant Pan.........................................Yes
Taper Attachment....................................Yes
Thread Dial.........................................Yes
Rapid Traverse (6 Way)..............................Yes
Power Feeding Compound..............................Yes
Steady Rest.........................................Yes
Note:
Machine has just came in, it will take 3-4 weeks to process
the machine with a purchase order.
Headstock and apron will be cleaned and flush and new oil.
Cross slide, compound and taper attachment will cleaned and
checked. Machine has been cleaned, painted and cycled.
Prices subject to change without notice.
Optional:
Newall 2 Axis D.R.O. System Installed............$6,850.00
Bu modelin daha fazla giriş gör
STANKO 1M635
Motor Torna
STANKO 1M635
Motor Torna
Bu Tip fazla listeleri gör
SHARP 2680B
Motor Torna
SHARP W1840
Motor Torna
GIUSEPPE GIANA 3280 GAP BED ENGINE LATHE
Motor Torna
WAGNER BNK 710
Motor Torna
Bu Brand daha bakın listeleri
STANKO 5M150 NC
Dişli Biçimlendiriciler
STANKO IS - S 1000
Dişli Biçimlendiriciler
STANKO SM-1LG-2000
İç Taşlama
STANKO 60/63
Dikey delik Mills (incld VTL)