CHIAN SENG AAT45
CHIAN SENG AAT60
CHIAN SENG AATD
CHIAN SENG AFT
Spiral Flute Reamer is welded with carbide flutes for finishing milling internal bore; it is a left spiral flutes and Morse Taper Shank.
CHIAN SENG AFTO
Helical Flute Reamer is welded with carbide flutes for finishing milling internal bore; it is a left helical flutes and Morse Taper Shank.
CHIAN SENG AHT
CHIAN SENG AHTC
CHIAN SENG AHTR
CHIAN SENG AHTU
CHIAN SENG AHTW
CHIAN SENG AHTX
CHIAN SENG AISA
Welding End Mill With Taiwan high technology and high-quality tungsten-steel blades, it ensures precise quality through a variety of rigorous manufacturing processes and welding techniques, and thr...
CHIAN SENG AISB
Roughing End Mill (Multiple Connected Flute), the flutes are made of multiple connected short flutes & carbide material to be a long flute and then welded on cutter, it can avoid the breakage durin...
CHIAN SENG AISC
Roughing End Mill is welded with carbide flutes and suitable for heaving milling with good chip release, excellent cutting ability and high metal cutting rate.
CHIAN SENG AISD
CHIAN SENG AISF
Over-Center End Mill is welded with carbide flutes and suitable for side milling and the groove milling. The flutes of front end are over-center to feeding forward and direct-milling on the parall...
CHIAN SENG AISY
Powerful Roughing End Mill (Semi-Circular Flute) is welded with carbide flutes, it is milling rapider and cutting heavier better than Roughing End Mill as well as with good chip release, excellent ...
CHIAN SENG AMTR
CHIAN SENG AMTX
CHIAN SENG AOT
CHIAN SENG ART
CHIAN SENG ATT
CHIAN SENG ATTX
CHIAN SENG AUTA
CHIAN SENG AUTB
CHIAN SENG AUTC
CHIAN SENG AUTO
CHIAN SENG AVT 60
CHIAN SENG AVT 90
CHIAN SENG AVTH
CHIAN SENG AVTV
CHIAN SENG AXJ
Welding Flat Spotting Drill is welded with carbide flutes as flat shape and suitable for positioning and chamfering. Before the formal boring, it is necessary to pre-drill a centering hole on the w...
CHIAN SENG CUSTOMIZATION
CHIAN SENG HSS
HSS Front-Tip Carbide Welding Drill is welded with carbide of the front end and suitable for deep bore machining; the shank is Morse taper handle.
CHIAN SENG W-AITY
CHIAN SENG W-ART
CHIAN SENG W-ATT
CHIAN SENG W-AVTH
CHIAN SENG W-AXJ
Carbide Spotting Drill is complete made of tungsten steel and suitable for positioning and chamfering. Before the formal boring, it is necessary to pre-drill a centering hole on the workpiece with ...
CHIAN SENG W-TUNGSTEN
Carbide End Mill Made with the material of tungsten carbide and grinding by Germany-made WALTER machines, that the material is rigid as well as having good wear-resistance to extend the processing ...