29 Görünen Model
thumb

FEIHONG CT-15

Motor Power:  380V 50HZ 750W  Rotating Speed: 900rpm  1800rpm Max Inner Diameter:  Φ15mm Air supply:  0.6Mpa clean compres...

Cut-Off Maçları, Tüp, Boru ve Bar
1 fotoğraf
thumb

FEIHONG CT-30

CT-30 Tube Cutting Machine is for cutting empty tubes in to various length according to your requirement. This machine is mostly used in electric heating tube production. Max suitable tube diamete...

Botu / Tüp Makinaları (Biçimlendirme)
2 fotoğraf
thumb

FEIHONG DRS-23

MAIN TECHNICAL PARAMETER: Max. length: 500mm Min. diameter:  Φ0.07mm Power:  200V 50HZ 500W

tel sarıcılar
1 fotoğraf
thumb

FEIHONG DRS-23PLC

For wiring the reistance coil for cartridge heating elements, or any other electrict heaters with MGO bar or mica sheet inside. MAIN TECHNICAL PARAMETER: 1. wind length: 10mm-2000 mm 2.minimum the...

Botu / Tüp Makinaları (Biçimlendirme)
3 fotoğraf
thumb

FEIHONG FH-25PLC

FH-25PLC Keeping Ends Wire Winding Machine is for wiring the resistance wire coil for hair dryers, hand dryers, electric heaters and other electric heating home appliance. It can automatically kee...

Botu / Tüp Makinaları (Biçimlendirme)
3 fotoğraf
thumb

FEIHONG FHCS-01

CS-01 Single Tank Ultrasonic Wave Cleaner : CS-01 single-tank ultrasonic wave cleaner introduces single stainless steel tank and the built-in ultrasonic vibrating board composed by Hi-Q,low-voltage...

Ultrasonik Temizleme Sistemleri
1 fotoğraf
thumb

FEIHONG FHCS-03

CS-03 Tri-tank Ultrasonic Wave Cleaner: CS-03 ultrasonic cleaner employs nonflammable environment-favored organic solvent in cleaning.The cleaner is specially designed for the better cleansing effe...

Ultrasonik Temizleme Sistemleri
1 fotoğraf
thumb

FEIHONG FHCT-15

Motor Power:  380V 50HZ 750W  Rotating Speed: 900rpm  1800rpm Max Inner Diameter:  Φ15mm Air supply:  0.6Mpa clean compres...

Cut-Off Maçları, Tüp, Boru ve Bar
1 fotoğraf
thumb

FEIHONG FHDG 30

Maximum reduced-roll diameter:Φ30mm Minimum reduced-roll length: 60mm

Boru Haddehaneleri
1 fotoğraf
thumb

FEIHONG FHDH-105

Pneumatic Spot Welding Machine: The Spot Welding Machine is used for the welding of resistance wire, with the capacity of 5KVA, power of 380V and pneumatic clean compressed air of 0.6MPa.

Kaynakçı, Nokta
1 fotoğraf
thumb

FEIHONG FHDH-106

Discharge Spot Welding Machine: The Spot Welding Machine use condensers of large capacity to charge and discharge for spot welding. It is also used for the large diameter resistance wire welding an...

Kaynakçı, Nokta
1 fotoğraf
thumb

FEIHONG FHDRS-23

DRS-23CNC Resistance Winding Machine: DRS-23PLC winding machine is specially designed for the production in such high density electric components of single-end lead-out wires as mica sheet electric...

tel sarıcılar
1 fotoğraf
thumb

FEIHONG FHDRS-24 PLC

DRS-24 CNC Hot Running Heater Winding Machine: The machine is using PLC plus touch screen control. This machine is designed with reference to imported products, specializing in the production of sp...

tel sarıcılar
1 fotoğraf
thumb

FEIHONG FHGZJ-202

Manual Marking Machine : Manual Marking Machine can be used to push the fixture manually. It makes the tube roll on the marking mould and then stamp marks such as V(voltage) and W(power) on the rol...

Markalama Makineleri
1 fotoğraf
thumb

FEIHONG FHGZJ-204

Air-fuel Marking Machine: Equipped with the marking mould, the air-fuel supercharging press can stamp marks such as the company logo, V (voltage) and W (power) on the axis way of the tube element. ...

Markalama Makineleri
1 fotoğraf
thumb

FEIHONG FHPG-30

Single Buffing Machine: This is simple buffing equipment, with the buffing wheel driven by the electrical machine at high speed. Rollers are driven by the reduction gearbox of another electrical ma...

Cilalama Makinaları (Dahil Tamponlar)
1 fotoğraf
thumb

FEIHONG FHRP-220

Double Shafts Winding Machine: This machine is used to spiral the cooling fin to heating tube. The machine adopts motor as power,frequency adjust speed and PlC control,it can spiral on the two heat...

tel sarıcılar
1 fotoğraf
thumb

FEIHONG FHRS-328 PLC

MAIN TECHNICAL PARAMETER: production capacity: 2500-3000 pcs/8h Diameter of resistance wire: Φ0.12-Φ1.0mm Diameter of core axle:  Φ1.0-Φ10mm Power:&nbs...

tel sarıcılar
1 fotoğraf
thumb

FEIHONG FHRS-328B

RS-328B Resistance Winding Machine: The working theory of RS-328B resistance-wire winding machine for the manufacturing of compact spiral coils is to reel the coil to the payoff with a brake gear, ...

tel sarıcılar
1 fotoğraf
thumb

FEIHONG FHTH-201

MAIN TECHNICAL PARAMETER: Minimum length of annealing:  100 mm Maximum length of annealing:  1000 mm Power source:  380 V of&n...

Fırınlar, Tavlama
1 fotoğraf
thumb

FEIHONG FHTH-202

Item: FHTH-202 MAIN TECHNICAL PARAMETER: Minimum length of annealing:  100 mm Maximum length of annealing:  1000 mm Power source:  380...

Fırınlar, Tavlama
1 fotoğraf
thumb

FEIHONG FHTZ-3B

TZ-3B Straightening Machine: Using for regulating of tubes with Minimum straightening length of 450mm and straightening dia. of φ4~φ20mm. Minimum straightening length : 450mm straighteni...

Düzleştirici, Tüp & Bar
1 fotoğraf
thumb

FEIHONG FHWG-102

90°Double-End Roll Bender: This is a Hydraulic Roll Bender with two bending heads (usually 90°). Due to the long bayonets, it performs bending at both two sides. It can bend 2-3 components each time.

Bükme, Boru, Tüp & Bar
1 fotoğraf
thumb

FEIHONG FHWG-105

MAIN TECHNICAL PARAMETER: max: triphase 380V Air supply: 50Hz,2.3KW  Suit diameter: Φ5.0~Φ12.7 Production efficiency : 20000pcs per eight hour Size: 25...

Bükme, Boru, Tüp & Bar
1 fotoğraf
thumb

FEIHONG FHZCT-40PLC

ZCT-40PLC Full-Auto Cutting Machine: Full-Auto Cutting Machine is a special equipment.for cutting varies pipes include heated pipes. This machine is controlled by PLC, also it shows the operating p...

Cut-Off Maçları, Tüp, Boru ve Bar
1 fotoğraf
thumb

FEIHONG RS-328B

Tel Makineleri (Diğerleri)
4 fotoğraf
thumb

FEIHONG TZ-12B

TZ-12 Straightener comprises of 14 straightening rollers, 7 in a group in the shape of a triangle, driven by reduction motor and with an in-between angle of 90°. Three rollers of the six are adjust...

Düzleştirici, Tüp & Bar
4 fotoğraf
thumb

FEIHONG TZ-3B

Using for regulating of tubes with Minimum straightening length of 450mm and straightening dia. of φ4~φ20mm.

Düzleştirici, Tüp & Bar
3 fotoğraf
thumb

FEIHONG ZG30A

ZG30A S/S Tube Forming Machine: ZG30 tube forming machine is designed for stainless steel tube and low-carbon steel tube which can be used for specialized production of electric tube. It is compose...

Boru Haddehaneleri
1 fotoğraf