OKUMA 2SP-150H
OSP P300L CNC Control Twin Spindle - Twin Turret Gantry Rail System
OKUMA 2SP-150H
Okuma OSP-P300L CNC Control OGL 3FG 3-Axis Gantry Loader Twin Spindle Twin Turret
OKUMA 2SP-150H
2016 Okuma 2SP-150H CNC Lathe, twin spindle & turret, robotic loader, Max. Turn Dia. 8.66", Max. Length 5.91", 50-4500 RPM, OSP P300L control. Enhance your precision manufacturing.
OKUMA 2SP-150H
The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loade...
OKUMA 2SP-150H
The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loade...
OKUMA 2SP-150H
Okuma OSP-P300L CNC Control OGL 3FG 3-Axis Gantry Loader Twin Spindle Twin Turret
OKUMA 2SP-150H
The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loade...
OKUMA 2SP-150H
Okuma OSP-P300L CNC Control OGL 3FG 3-Axis Gantry Loader Twin Spindle Twin Turret
OKUMA 2SP-150H
Okuma OSP-P300L CNC Control OGL 3FG 3-Axis Gantry Loader Twin Spindle Twin Turret
OKUMA 2SP-150H
The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loade...
OKUMA 2SP-150H
Okuma OSP-P300L CNC Control OGL 3FG 3-Axis Gantry Loader Twin Spindle Twin Turret
OKUMA 2SP-V80
OKUMA 2SP-V80 VERTICAL TURRET LATHE NEW: 2013 | JC 85348
OKUMA 7 FT ARM X 22 " COLUMN DRA-J-550 X 2000
*SPECIFICATIONS WERE TAKEN FROM MANUFACTURERS INFORMATION AND SHOULD BE VERIFIED.
OKUMA 762S-BB
SMW space saver 2000 Bar feed Chip Conveyor Parts Catcher ATS S30 collet chuck 10" Kitagawa Chuck
OKUMA 762S-SB
Okuma 762S-SB Crown L1060 CNC Turning Center Lathe
OKUMA B-400-W 1500
Okuma Multus B-400-W 1500 Mill Turn, 5-Axis, B-Axis Milling Spindle, Sub Spindle, 60 ATC, 10,000 RPM, 2008, #43002
OKUMA CADET MATE 4020
Okuma Cadet Mate V-4020 CNC Vertical Machining Center, OSP-5020M CNC Control, 40" X 20" X 20" Travels, 40 Taper, 20 ATC, 8,000 RPM.....................$12,500.00 F.O.B Dayton ,Ohio Contact Larry 93...
OKUMA CADET MATE V4020
CNC Vertical Machining Center
OKUMA CADET-V
MACHINE IS IN GOOD CONDITION. WAS BOUGHT NEW IN 1997 RAN ONE SHIFT VERY WELL MAINTAINED PRIMARILY RAN 90% ALUMINUM 1 TO 2 PIECE PARTS NO PRODUCTION. UPGRADING TO A NEW HAAS AS THEY NEED MORE Y-AXIS...
OKUMA CAPTAIN L370
OKUMA CAPTAIN-L370 CNC TURNING CENTER, OSP-P200L CNC Control, 8" 3-Jaw Hydraulic Chuck, 20.8" Swing, 19.68" Max Turning Length, 2.44" Spindle Bore, 4500 RPM Spindle, 12-Position Turret, Henning Chi...
OKUMA CAPTAIN L370
Okuma L370 Captain CNC Lathe, 2001 – Chip Conveyor, 10″ Chuck
OKUMA CAPTAIN L370MW
Okuma Captain L370MW CNC Lathe, 2006 – Sub Spindle, Bar Feeder, Live Tooling
OKUMA CAPTAIN L470
Okuma Captain L470 CNC Turning Center Lathe
OKUMA CAPTAIN L470M
This machine was Reconditioned about 5 years ago, but the machine has run a limited time since this time, under 200 hours. Has a VDI 40 Live milling turret, with some tool holders. Note: The chi...
OKUMA CAPTAIN L470M
Machine was Reconditioned about 5 years ago, but has only run about 200 hours since this time. Excellent condition, with 12" chuck with a VDI 40 Live milling turret, tailstock, and working chip co...
OKUMA CP CAPTO LIVE HOLDERS
76 available
OKUMA CROWN 762SBB
Okuma Crown 762S-BB CNC Lathe, 1998 – Parts Catcher, Tailstock, Bar Feeder, Chip Conveyor, Low Hours, Tooling Included
OKUMA CROWN 769
Okuma long bed lathe: 50.1" cutting length, 3.150" bar capacity, with 15" hydraulic 3-jaw chuck.
OKUMA CROWN L1060
Okuma OSP U10L CNC Control LNS Quick Load Barfeeder Chip Conveyor Tailstock Collet Chuck
OKUMA CROWN L1060
SN: 1272, has OSP700 Okuma controller with Monochrome One Touch IGF, chip conveyor 12 stateion turret, 24HP, 3500 RPM, cutting length 19.68", spindle bore 2.76", maximum clamping diameter 10", powe...
OKUMA CROWN L1060 762SBB
Okuma Crown L1060 762SBB Big Bore CNC Turning Center, 1999 – Chip Conveyor
OKUMA CROWN L1420
Okuma Crown L1420 CNC Lathe, 2000 – Chip Conveyer Included
OKUMA CROWN MC-V4018
Spindle to Table: 6.3″ – 24.02″ Table Load: 1500 Lbs 20 Tool Capacity Cat 40 Taper 10 H.P. Motor 12,000 RPM Max Spindle Speed Equipped with: Okuma OSP-U10M CNC Control 3.5″ Floppy RS232 Port Graph...
OKUMA CROWN V4018
CNC Vertical Machining Center
