• 5-axis vertical portal milling machine in Gantry design. • Fork milling head T21C for simultaneous milling operation with FISCHER spindle, 42kW, 67Nm, 24.000 rpm, HSK-A63 • Manually operated textile roof • Tool changer chain 50-fold, change orientation vertical • 3D probe for workpiece measurement • Process monitoring system MONTRONIX incl. installed vibration sensors for detection of abnormal vibrations during the machining process. Alarm triggering, feed rate reduction or machine stop are carried out via the control system • HEIDENHAIN HR550 handwheel (wireless) • BLUM LaserControl NT for non-contact tool measurement with automatic cover, enables increased process reliability through automatic form and wear control of the tools used • Coolant system KNOLL for cooling lubrication with supply via spray nozzles and supply through the main spindle (ICS) • TRIMILL Kinematics - application for rotary axes • TRIMILL Teleservice - remote support • Linear, absolute and direct path measuring systems make HEIDENHAIN in X, Y and Z axis with a resolution of 0,001mm • Hydraulic power unit • 1 lubrication unit for the machine • 1 lubrication unit for the milling spindle • 1 cooling unit for cooling the milling head • 1 cooling unit for cooling the axis motors • 1 pc. Air extraction unit for oil and cooling lubricant emulsion with three-stage filtering, power consumption 2.2 kW, max. extraction capacity 2,000 m³. Extraction capacity 2.000 m³/h • 2 scraper belt conveyors, positioned along the X-axis to the left and right of the machine table, discharge height approx. 1,050mm Operating hours: Control ON 33,540 h, machine ON 19,750 h, program run 8,303 h, Main spindle old 8,435 h, spindle exchange in 01/2022 Main spindle new "0" h!!!