To the best of our knowledge all details listed below are deemed correct. It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase. *For Complete Operation Information See Attached Manual* General Specifications: The workflow is from Left to Right. The system is constructed of LOAD/UNLOAD table, W/W/R//R/R.I console and DRYER console. The W/W/R/R/R.I console consists of station #2 (WASH), station #3 (WASH), station #4 (CASCADE RINSE#!), station #5 (CASCADE RINSE #2) and station #6 (RUST INHIBITOR). 'Dryer console consists of station #7 (Dryer). The generators are located near electrical control box on right side of console. The tanks material is 316 grade stainless steel, with #2B finish Typical Process Table Station 1: Load station (Sensored table). Station 2: Ultrasonic immersion wash, with one sided overflow, 1000 watts ultrasonics ( 40kHz), 4000 watts Heat, .75 Hp recirculation pump, recirc 5-7 gpm. 10 micron filter. Auto fill polypro chamber oil coalescer: Temp: 50 Degrees Celsius Dwell: 300 Seconds Station 3: Ultrasonic immersion wash, with one sided overflow, 4000 watts Heat, 1/8 Hp recirculation pump, 10 micron filter, 5-7 gpm recirc flow. 1000W@ 68kHz UIS. Option to recirculate or pump fluid back to station #2. Temp: 50 Degrees Celsius Dwell: 240 Seconds Station 4: Ultrasonic immersion rinse, with one sided overflow, 4000 watts Heat. 500 watts @ 68 kHz UIS. Dwell: 120 Seconds Station 5: Ultrasonic immersion rinse, with one sided overflow, 4000 watts Heat. Temp: 50 Degrees Celsius Dwell: 240 Seconds Station 6: Rust inhibitor station. 4000 watts heat. Temp: 50 Degrees Celsius Dwell: 240 Seconds Station 7: Pass-Through Air Blow-off Parallel Headers on 12" Sides. Rocking Air Knivc also provided near bottom of Dryer Tank Recirculated Hot Air HEP A Dryer 1100 cfm, 10000 watts Heat. Temp: Ambient / 100 Degrees Celsius Dwell: 300 Seconds Station 8: Unload station (Sensored table)