12’ Iemca Bar Feed Mist-Fit MF550

TECHNICAL SPECIFICATIONS SWISS GT 26/6 SWISS GT 26 B 6 linear axes + 2 C-axis 6 linear axes + 2 C-axis + 1 B-axis 2 independent tool systems 2 independent tool systems Main spindle Max. bar capacity mm 23 (25.4) 23 (25.4) Standard workpiece length with rotating guide bush mm 220 220 Spindle rotation speed rpm 0-10,000 0-10,000 Spindle power kW 8.2 (10.5) 8.2 (10.5) Max. torque Nm 26 26 Platten Max. number of turning tools 10 10 Turning tool section 16 x 16 16 x 16 Number of frontal tools (op/cop) 5 / (5) Positions for rotating tools (S11) 4 4 Positions for rotating tools (S21 modular positions) 3 Rotating tool speed of rotation rpm 5000 5000 Rotating tool power (S11 / S21) kW 0.75 / 1 0.75 B-axis Number of rotating tool positions S21 (op /cop) 4 / 4 Number of fix frontal tools (op /cop) 4 HF spindle Option Thread whirling device Option Rotating tool speed of rotation rpm 9000 Rotating tool power (S11 / S21) kW 0.75 / 1 Counter spindle Max. bar capacity mm 25.4 25.4 Insertion length of workpiece into spindle mm 120 120 Max standard output length of workpiece mm 120 120 Spindle rotation speed rpm 0-10,000 0-10,000 Spindle power kW 8.2 (10.5) 8.2 (10.5) Max. torque Nm 26 26 Number of tool positions next to the counter spindle 2 2 Counter operation Number of tool positions 8 8 Positions for rotating tools 4 4 Rotating tool speed of rotation rpm 5000 5000 Rotating tool power kW 0.75 0.75 Total number of tools 40 36 Operation /counter-operation tool distribution 27/13 23/13 TECHNICAL SPECIFICATIONS SWISS GT 26/6 SWISS GT 26 B 6 linear axes + 2 C-axis 6 linear axes + 2 C-axis + 1 B-axis 2 independent tool systems 2 independent tool systems BASIC MACHINE EQUIPMENT Rotating guide bush with integrated motor X X Machining without guide bush X X S21 rear platten rotating tool motor X X S11 front platten rotating tool motor X X S51 rotating tool motor in counter-operation X X C1 + C4 axes X X Interpolation in polar coordinates Option Option Pneumatic workpiece ejector + oil cleaning of collet X X Automatic centralised lubrication cycle X X Beacon (4 colour) X X 20 bar lubrication pump with manual selection filters X X Bar feeder interface X X Fire extinguisher interface X X TISIS programming software Option Option NUMERICAL CONTROL Control type Fanuc 31iB Fanuc 31iB Encoder / axis motor technique Absolute serial Absolute serial Motor type (axes and guide bush) Synchronous (AC) Synchronous (AC) Motor type (spindles) Asynchronous (AC) Asynchronous (AC) Colour screen and mobile operator console PROGRAMMING SOFTWARE ISO language code C, TMI Cutting Hours: 435