Cross section of cutting tool: 2.250" x 2.250" Number of Crossrail Tool Heads: (2) Number of Side Heads: (1) Note: Sidehead ram is adapted for accomodation of clamping tools Number of chuck jaws: (4) Equipment for turning tapers & cutting threads using change gears with right-hand tool head on cross-rail Width of T-Slots in table: 1.41" Distance btwn table center & column edge measured in inclined plane (approx): 104" Distance range btwn table center & toolholder of side head: 51" to 100" Max lowering of center of side head ram below table: 9.45" Diameter range of workpieces that can be clamped by jaws: 28.55" to 179.7" Rate of Crossrail adjustment (approx): 24 inches/minute Horizontal movement of sidehead ram: 49.23" Horizontal movement of cross rail toolhead measured from machine center to center of ram adjusted to it's extreme outer position (approx): 0.785" to 112.9" Number of feeds to cross rail toolhead: (14) Number of feeds to sidehead: (14) Vertical and horizontal rapid feed motions to crossrail toolhead: 28 ipm Vertical and horizontal rapid feed motions to sidehead: 28 ipm Power-operated swiveling of cross rail toolheads: 16 rpm 440/3/60 Electrics (normal running load of 280 amps)

Skoda Blansko SK-50A Dual Column CNC Vertical Boring Mill Tbl Dia 187 " Swing 228 " Builder Blansko Height 120.1 " Type CNC Vertical Boring Mill Tbl load 100,000 lbs Age/Rtf 1977 Model SK-50A Control Siemens 828D Distance between the Columns 204 " Side Head Horizontal Travel 49.2 " Main Motor Power 100 hp