Револьверные станки (RAM & Седло)WARNER & SWASEY 4A M-3550 LOT 39
СШАобзор
Марка
Модель
4A M-3550 LOT 39
ИД №
529316
Состояние
Б - Хорошо
Год
1964
Серийный №
2056722
Местонахождение
США
Складской №
L630460
4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
Преобразование Спецификации для метрической
Model | 4A M-3550 |
Наибольшая амплитуда колибаний | 28.25" |
Center Distance | 62 in |
Тип | Saddle |
Размеры | 20' Long. X 84" Wide X 84" High |
Вес | 24,000 Lbs. |
Оснащен
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide and hex turret. Gibs reworked and refitted. New 24"4-jaw Gator chuck with reconditioning. It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice.
Price: $119,500.00 for the above work completed.
If you would like the machine reconditioned, the above work
will be started once the PO and deposit are received.
Estimated time frame eight weeks
Спецификация
Swing Over Bed Ways 28-1/4"
Swing Over Cross Slide Carriage 22"
Spindle Hole 9-1/4"
Center Distance 62"
Spindle Speeds 20 To 526 Rpm's
Spindle Nose A-15
Chuck Size 24" 4-Jaw New Gator
Feeds Cross .004 To .090 I.P.R.
Feeds Long. .005 To .167 I.P.R.
Main Motor 75 / 37.5 Hp.
Floor Space Right To Left 20'
Floor Space Front To Back 7'
Machine Height 80"
Weight 24,000 Lbs.
Flange Holders 4
Slide Tool (1) Yes
Tool Post 4 Way On Front Yes
Fixed Rear Turret Yes
Full Chip Pan And Coolant Yes
Coolant Yes
Note: Machine has been cleaned, painted and cycled. Good working condition.
Front Ways does have some scoring.
Просмотр других листингов такого типа
GISHOLT 4L
Револьверные станки (RAM & Седло)
GISHOLT 5L
Револьверные станки (RAM & Седло)
WARNER & SWASEY 4A M-3550
Револьверные станки (RAM & Седло)
WARNER & SWASEY M-3580
Револьверные станки (RAM & Седло)
Просмотр других листингов на этот бренд
WARNER & SWASEY LU4
Универсальные шлифовальные цилиндрические
WARNER & SWASEY LCV5
Цилиндрические шлифовальные включая простой и Угловая головка
WARNER & SWASEY C5
Цилиндрические шлифовальные включая простой и Угловая головка
WARNER & SWASEY
Цилиндрические шлифовальные включая простой и Угловая головка