Tornos motorSTANLEY
Quebec, CanadáOverview
STANLEY SLIDING BED GAP LATHE WITH BACKBED----
Compact machine with plenty of capacity for occupied floor space.----
Very very Uncommon on the market, this lathe can be operated from the front or the rear----
Details :--
Distance between center is 72" closed and approx 10' open---
Swing above the gap: Approximately 63”---
Swing over ways: 30"----
Swing over carriage wing:29"----
Swing over cross slide: 22" possibly 23"----
Faceplate diameter 60’’---
Spindle bore : 4"---
Spindle speeds (7 to 350 RPM)---
550 volt 15 hp motor---
Machine weight 14850 lbs plus backbed 2500 lbs approx---
Equipped with the rear Back bed----
If you have any questions the ideal is to leave me your number and I will call you as soon as I have a few minutes because it is easier for me.--
You can still call me---
Yannick from Omicron machinery at819-376-0529Thanks---
Have a nice day---
Converter Especificações para Metric
Balanço | 63" |
Centros/Contra-pontas | 120" |
Furo do Eixo | 4" |
Potência | 15 hp |
RPM | 350 RPM |
Equipped With
STANLEY SLIDING BED GAP LATHE WITH BACKBED---
Compact machine with plenty of capacity for occupied floor space.---
Very very Uncommon on the market, this lathe can be operated from the front or the rear---
Details :---
Distance between center is 72" closed and approx 10' open---
Swing above the gap: Approximately 63”---
Swing over ways: 30"----
Swing over carriage wing:29"----
Swing over cross slide: 22" possibly 23"----
Faceplate diameter 60’’---
Spindle bore : 4"---
Spindle speeds (7 to 350 RPM)---
550 volt 15 hp motor---
Machine weight 14850 lbs plus backbed 2500 lbs approx---
Equipped with the rear Back bed---
If you have any questions the ideal is to leave me your number and I will call you as soon as I have a few minutes because it is easier for me.
You can still call me--
Yannick from Omicron machinery at819-376-0529Thanks--
Have a nice day--
Folha de Especificações
STANLEY SLIDING BED GAP LATHE WITH BACKBED
Compact machine with plenty of capacity for occupied floor space.
Very very Uncommon on the market, this lathe can be operated from the front or the rear
Details :
Distance between center is 72" closed and approx 10' open
Swing above the gap: Approximately 63”
Swing over ways: 30"----
Swing over carriage wing:29"----
Swing over cross slide: 22" possibly 23"----
Faceplate diameter 60’’
Spindle bore : 4"
Spindle speeds (7 to 350 RPM)
550 volt 15 hp motor
Machine weight 14850 lbs plus backbed 2500 lbs approx
Equipped with the rear Back bed
If you have any questions the ideal is to leave me your number and I will call you as soon as I have a few minutes because it is easier for me.
You can still call me
Yannick from Omicron machinery at819-376-0529Thanks
Have a nice day
Veja mais anúncios deste tipo
SHARP 2680B
Tornos motor
SHARP W1840
Tornos motor
GIUSEPPE GIANA 3280 GAP BED ENGINE LATHE
Tornos motor
WAGNER BNK 710
Tornos motor
Ver mais imóveis para esta marca
STANLEY
Controles CNC e Não CNC