Tornos motorSTANKO 1M635
Texas, Estados UnidosVisão geral
Marca
Modelo
ID #
577753
Tipo
Estado
Usado - Bom
Ano
1990
Serial #
3719
Local
Texas
Estados Unidos
Estados Unidos
Stock #
L3000338
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
Converter Especificações para Metric
Balanço | 27" |
Altura Útil sobre o Carro Transversal | 14.1" |
Centros/Contra-pontas | 118" |
Furo do Eixo | 3.125" |
RPM | 1,250 RPM |
Potência | 20 hp |
Dimensões | R-L 226" X F-B 72" X Height 62" |
Peso | 12,584 Lbs. |
Folha de Especificações
Swing Over Bed Ways.................................27.56"
Swing Over Cross Slide..............................14.1"
Cross Slide Travel..................................15.75"
Swing In Gap........................................35.43" X 17.72" Long
Compound Travel.....................................8.6"
Compound Swivel.....................................+/- 90 Degrees
Center Distance.....................................118"
Weight Between Center...............................7,700 Lbs.
Spindle Hole........................................3-1/8"
Spindle Speeds......................................10 To 1,250 Rpm's
Spindle Nose........................................A1-11
New Gator...........................................16"3-Jaw Chuck With 2 Piece Jaws
New Gator...........................................20" 4-Jaw Chuck With 2 Piece Jaws
Feeds Compound......................................0007 To .017
Feeds Cross Slide...................................0.001 To .20
Feeds Carriage......................................0.0024 To .05
Threads Inch........................................1/4 To 28 TPI
Threads Metric......................................1 To 224 MM
Tail Stock Quill Diameter...........................3-1/2"
Tail Stock Quill Travel.............................9.4"
Tail Stock Taper....................................#6 Morse
Maine Motor.........................................20.4 Hp.
Floor Space.........................................R-L 226" X F-B 72"
Machine Height......................................62"
Weight..............................................12,584 Lbs.
Coolant Pan.........................................Yes
Taper Attachment....................................Yes
Thread Dial.........................................Yes
Rapid Traverse (6 Way)..............................Yes
Power Feeding Compound..............................Yes
Steady Rest.........................................Yes
Note:
Machine has just came in, it will take 3-4 weeks to process
the machine with a purchase order.
Headstock and apron will be cleaned and flush and new oil.
Cross slide, compound and taper attachment will cleaned and
checked. Machine has been cleaned, painted and cycled.
Prices subject to change without notice.
Optional:
Newall 2 Axis D.R.O. System Installed............$6,850.00
Veja mais anúncios deste modelo
STANKO 1M635
Tornos motor
STANKO 1M635
Tornos motor
Veja mais anúncios deste tipo
SHARP 2680B
Tornos motor
SHARP W1840
Tornos motor
GIUSEPPE GIANA 3280 GAP BED ENGINE LATHE
Tornos motor
WAGNER BNK 710
Tornos motor
Ver mais imóveis para esta marca
STANKO 5M150 NC
Perfiladores de Engrenagens
STANKO IS - S 1000
Perfiladores de Engrenagens
STANKO SM-1LG-2000
Grinders internos
STANKO 60/63
Vertical chato Mills (incld VTL)