Coe 48″ x .187″ x 20,000-Lb Coil Servo Feed Line Asset #16312 New Controls in 2021 over $400,000 NEW Consisting of: Coe CPCC-20048 Coil Cradle Coe MCRS Coil Staging & Loading Ramp Coe CPPS-400-48 7-Roll Coil Straightener (S/N 32202-3) w/ (2) Sets of Power Driven Pinch Rolls, Overhead Loop Support Chute Coe 48″ Servo Feed w/ ServoMaster Control Console Coe Press Equipment Corporation Coe Servo Roll Feed 48″ Wide Material Specifications M.C.R.S. – Max: 0.187″ thick @ 48.00″ wide M.C.R.S. – Max: 0.210″ thick @ 42.00″ wide M.C.R.S. – Max: 0.250″ thick @ 36.00″ wide M.C.R.S. – Max: 0.312″ thick @ 12.00″ wide Machine Specifications Feed Direction: Right To Left Pass Line: Roll Feed Specifications Number of Rolls: 2 Roll Diameter: 5 Inches Full Body Width: 24 Inches Drive Ratio: 5.0:1 Acceleration: 25 Feet/Sec/Sec Roll Speed: 270 Feet/Minute Feed Accuracy: +/_ 0.003 Inch Roll Feed Standard Features • Sealed Precision Roller Bearings • Upper and Lower Feed Rolls With #3 Crodon Chrome Finish • Desk Type Slant Top Control Enclosure – Painted Standard Machine Cream • 230/460 Volt AC Three Phase Supply Voltage • 3 Roll Catenary Support Section With Full Sideplates and Funnels • Air Pressure Regulator for Exact Feed Roll Pressure • Cluster Gear Driven Upper Feed Roll With Mating Splined Shafts and Gears • Emergency Stop Push Button • Fused Electrical Safety Disconnect • Heavy Duty Cabinet Base with Press Mount Brackets & +1- 6″ of Height Adjustment • High Performance Maintenance Free AC Brushless Servo Motor • Partial Width Upper and Lower Feed Rolls • Remote Jog Pendant • Rigid Machined Tie Bar Construction for Precise Assembly • Single Cycle Pushbutton for Set-up at Jog Speed • ServoMaster Controller Roll Feed Standard Options • Dual Roll Hand Crank Edge Guides with Self Centering & Independent Adjustment Roll Feed Special Options • Tools free passline adjustment on heavy duty cabinet. Coe 4.00″ x 48″ Power Straightener, Item No. 2 – CPPS 400 Material Specifications M.C.R.S. – Max: 0.187″ thick @ 48.00″ wide M.C.R.S. – Max: 0.210″ thick @ 42.00″ wide M.C.R.S. – Max: 0.250″ thick @ 36.00″ wide M.C.R.S. – Max: 0.312″ thick @ 12.00″wide Equipment Specifications Payoff Rate: Up To 110 FPM Air Cylinder Bore: 5.0″ Pinch Roll Dia.: 4.00″ Breaker Roll Dia.: 4.00″ Machine Specifications Feed Direction: Right To Left Voltage: 460 Power Straightener Standard Features • Independent Adjustment of Straightening Rolls Through 2.5 Ton Screw Jacks • Rigid Tie Bar Construction of Straightener Head • Upper Straightener Roll Height Scales and Pointers 230/460 Volt AC Three Phase Supply Voltage • Air Cylinder Raise and Lower of Upper Pinch Roll • Central Point Lubrication System • Crodon Coated Upper and Lower Entrance Pinch Rolls • Electrical Safety Disconnect • Remote Jog Pendant for Material Threading Power Straightener Standard Options • 30 Horsepower AC Variable Speed Drive – Digital Control • Digital Upper Straightener Roll Height Indicators • Hand Crank Entrance Edge Guides • Single Row Upper and Lower Straightener Backup Rollers Power Straightener Special Options C Angled top straightener cabinet base. Reference previous Job 25072 Material to be payed off from a cradle into the angle top straightener. The overhead loop tunnel will be provided by the customer. Provide a line layout drawing for material up to .187 x 48 .250 x 36″ .312 x 12″ which indicates recommended loop area of 25 ft. Single operator station centrally located for the straightener and coil cradle operation. Includes ultra sonic loop control for automatic operation Hydraulic Operated Entrance and Exit Pinch Rolls Pressure regulators for the pinch roll pressure. Straightener drive will also power the cradle nest rolls. SPECIAL • Coil Cradle Model C Material Specifications M.C.R.S. – Max: 0.187″ thick @ 48.00″ wide M.C.R.S. – Max: 0.210″ thick @ wide M.C.R.S. – Max: 0.250″ thick @ 36.00″ wide M.C.R.S. – Max: 0.312′ thick @ 12.00″ wide Machine Specifications Feed Direction: Right To Left Equipment Notes Coil Weight Max: 20,000 lbs Coil Width Max: 48 Inches Maximum Coil OD: 60 Inches Maximum Stock Thickness: .250 x 36 Inches Wide. Maximum Stock Thickness: .312 x 12 Inches Wide Maximum Pay off Speed: 1 10 feet [Minute 8 “diameter nest rolls Hand crank independent inside plate adjustment (3) side rollers in each side plate. Hydraulic operated peeler/breaker system for threading material. Hydraulic system to supply the peeler/breaker and straightener pinch rolls. The cradle nest rolls will be powered by the straightener drive. The drive will be mounted inside the strarightener cabinet Reference Previous Job 25072 Job 32202 Item No- – SPECIAL – Coil Storage and Loading Ramp Material Specifications M.C.R.S. – Max: 0.187″ thick @ 48.00″ wide M.C.R.S. – Max: 0.210″ thick @ 42.00″ wide M.C.R.S. – Max: 0.250″ thick @ 36.00″ wide M.C.R.S. – Max: 0.312″ thick @ 12.00″wide Machine Specifications Feed Direction: Right To Left Pass Line: Equipment Notes Maximum Coil Weight: 20,000 Lbs. Maximum Coil Width: 48 Inches Maximum Coil OD: 60 Inches Maximum Material Thickness: .187 x 48 Inches wide. Maximum Material Thickness: .250 x 36 Inches wide. Maximum Material Thickness: .312 x 12 Inches wide. Attached to the coil cradle. Air operated spare coil storage and loading ramp. Handcrank adjustment side plates. Reference Previous job 25072