ACRA 9" x 42" Table Variable Speed Vertical Mill - LCM-42 (AC Inverter) w/Acu-Rite MillPwr 2 axis CNC Made in Taiwan Quill Heat Treat Hardened & Chromed Chrome Way Spindle: R8 Made from one piece of Ni-Cr alloy steel. Supported by two precision angular contact and one ball bearing to ensure rigidity. Inner Taper was hardened and ground. Inner taper runout keeps within 0.002mm. Adjustable Backlash Nut: Unique double nuts and backlash adjusting design, contact face enlarged ensuring accuracy over long term and easy for backlash adjustment. Milling Head Gear & Quill: Hardened & ground spindle, quiet and smooth, free of noise vibration. Use dynamically balanced pulleys and precision bearings. Spindle back gear running in grease packed housing ensures fatigue strength and low noise. Quill Heat Treat Hardened & Chromed. Rigid Head Tilting System: The head knuckle is our design patent. This structure increases the stability and rigidity, when vertical head is tilted at all angles, front and back to perform complicated work. There are T-Bolts to lock the knuckle to Ram instead of 3 bolts.

Especificação

Converter Especificações para Metric

Mesa-W	9"
Tabela-L	42"
Curso-Longo	30"
Curso - Cruzado	12"
Potência	3 hp
RPM	4,500 RPM
Cone	R-8
Dimensões	75" x 57.8" x 82.7"
Peso	2,400 lbs

Equipado com

Standard Equipment: Quill Heat Treated, Hardened & Chromed One Shot Lubrication ISO 9002 Certified: “Built to World Industrial Standards” Meehanite Castings: Highest grade of casting possible High Out-Put Head Cooling Fans: Ensures vari-drive and motor run at optimal temperatures extending belt life, pulleys & bearings ABEC-7 Spindle Bearings: The quill is ground and hard, chromed and fitted to housing w/a max spindle run-out of 0.0002″ T.I.P. Motor Shaft and Vari Drive: Are dynamically balanced, then chromed for a flawless fit, w/ground ribs on inside diameter. Motor shaft has an oil channel w/grease fitting. Lubrication: One shot lubrication system ensures table knee, and lead-screw are lubricated. Double Nut Backlash Design: Keeps backlash at .0008 over 20″ travel Table and Saddle: They are mounted w/preloaded thrust bearings, eliminating endplay for precise control of lateral movement. Ways are Hard-Chrome Dovetail on Saddle & Column Patented Knucle Design: Uses 6 bolts – 3 per side, securing them from the outside. This method locks the head securely resulting in greater accuracy and performance. Hand Scraped Saddle and Knee Oil Grooves are Milled. The LCM Mill: uses a roller bearing for the lower support of the motor shaft to ensure proper loading, support, and alignment.

Folha de Especificações

LCM-42 Y Axis Travel 12" Z Axis Travel (quill) 5" T-Slots 3" x 0.625" x 2.5" Ram Travel 12" Knee Travel 16" Throat Distance 6.75" - 18.75" Spindle Gaugeline to Table Top 0 - 18.5" Vertical Speed (Variable Speed 60 - 4500 RPM Quill Feed 0.0016/0.0031/0.0063" Vertical Spindle Taper R8 Head Tilt (right-left) 90º Head Tilt (up-down) +45 - 38º Vertical Motor 3 HP Dimensions 75" x 57.8" x 82.7" For More ACRA Series LCM Variable Speed Vertical Mill OPTIONAL ACCESSORIES: 6" Vise (China) W/Swivel……………………………………….................$250.00 6" Vise (Taiwan) W/Swivel .............................$600/800 R-8 Collet Set 12 PC (China) -AM2/AM5...................$100.00 R-8 Collet Set (Taiwan) - AM2/AM5 ......................$125.00 Clamping Kit 53 PC (China) .............................$100.00 Clamping Kit 53 PC (Taiwan) ...........................$125.00 6" Rotary Table H/V … …… … … $450.00 8" Rotary Table H/V ...................................$600.00 10" Rotary Table H/V ..................................$750.00 12" Rotary Table H/V ..................................$900.00 4" Riser Block – LCM-50 ...............................$700.00 6" Riser Block – LCM-50 ...............................$750.00 4” Riser Block LCTM 1,2,3 .............................$750.00 6” Riser Block LCTM 1,2,3 .............................$850.00 4" Riser Block – AM2, AM5 …… ..........................$700.00 6" Riser Block – AM2, AM5 ………..........................$750.00 8" Riser Block – AM2, AM5 ………..........................$850.00 Maxi-Torque Power Draw Bar R-8 / #30, 40 Taper (USA) ..$750.00 Right Angle Milling Attachment R-8 / #30 Taper ........$1,100.00 Right Angle Milling Attachment #40 Taper ..............$1,450.00 Right Angle Head R8 ...................................$750.00 Right Angle Head R30 ..................................$750.00 Right Angle Head #40 ...................................$900.00 Coolant System / Chip Tray ............................$850.00 Safety Handle………………………………………………………………………………………… ........$90.00 Quick Change Tool Set (17PC) - AM2………...................$350.00 Quick Change Tool Set (17PC) - AM5 ....................$400.00 Auto Lube Exchange .....................................$300.00 Auto Lube .............................................$400.00 ACRA LC Series Variable speed (R8 or #30NST) ...........$5,000.00 ACRA Mill Head 2 H.P. 16 Speed Step Pulley (2 Speed) (R8 or #30NST) $3,500.00 ACRA Mill Head 3 H.P. Variable Speed (R8 or #30NST) .....$4,500.00 ACRA Mill Head 3 H.P. AC Inverter Drive (R8 or #NST30) ..$5,500.00 NST #30 Spindle Instead of R-8 Spindle (LCM/LCTM1)…………………$250.00 Baldor Motor…………………………………………………………………………………………...... $750.00 OPTIONAL ACCESSORIES: PRICE Acu-Rite 2-Axis 203...……………………………………………………………………………... $2,400.00 Acu-Rite 2-Axis 303...……………………………………………………………………………... $2,900.00 Newall 2-Axis D.R.O. DP700…………………………………………………………………………. $2,000.00 Newall 2-Axis D.R.O. NMS300………………………………………………………………………...$1,200.00 Sony 2-Axis D.R.O. MILLMAN………………………………………………………………………... $ P.O.R. Mitutoyo 2-Axis D.R.O KA-200………………………………………………………………………….$ P.O.R. Installation For 2-Axis D.R.O…………………………………………………………………………$250.00 Acu-Rite 3-Axis 203...……………………………………………………………………………. $3,200.00 Acu-Rite 3-Axis 303...……………………………………………………………………………. $3,600.00 Accu-rite CNC MILLPWR G2 2 axis $33,750.00 Accu-rite CNC MILLPWR G2 3 axis $39,250.00 Newall 3-Axis D.R.O. DP700………………………………………………………………………… $2,700.00 Newall 3-Axis D.R.O. NMS300………………………………………………………………………...$1,600.00 Sony 3-Axis D.R.O. MILLMAN………………………………………………………………………. $P.O.R. Mitutoyo 3-Axis D.R.O KA-200………………………………………………………………………….$P.O.R. Installation For 3-Axis D.R.O…………………………………………………………………………$300.00 Power Feed X Axis Align……………………………………………………………………………… $450.00 Power Feed Y Axis Align……………………………………………………………………………… $550.00 Power Feed Z Axis Align……………………………………………………………………………… $550.00 Power Feed X Axis 140 Servo (USA)………………………………………………………………$P.O.R. Power Feed Y Axis 140 Servo (USA)………………………………………………………………$P.O.R. Power Feed X Axis 150 Servo (USA)………………………………………………………………$P.O.R. Power Feed Y Axis 150 Servo (USA)………………………………………………………………$P.O.R. Power Feed Z Axis (140 Only) Servo (USA)……………………………………………$P.O.R. Power Feed Installation X Axis………………………………………………………………………$50.00 Power Feed Installation Y Axis………………………………………………………………………$100.00 Power Feed Installation Z Axis………………………………………………………………………$100.00

Sobre o vendedor

Informações Vista Companhia

Solicitar um orçamento

Soma-se a lista de pedidos

Pedido apresentado 3/28/Sex