* mounted on left and right hand side, sliding on linear rails alongside on the measuring table: Measuring Slides System C 160 / CARMET cross section 160 x 160 mm for vertical adjustment, cross section approx. 100 x 100 mm for the horizontal measuring arm. * Original ZEISS Measuring Computer Control System Model C 99 S one built-in for each Measuring Slide, the Processor were replaced in 2015/16 * Mounted ZEISS Probe Head model RDS ( indexing, turnable and swivable) with long probefeeler and CAA Correction * Two handheld control units with joystick and special options, Model ZEISS P 26 * Used were the measuring software CMMOS and CALIGO and there are various disks available containing these softwares * Measuring table made of special cast iron as one unit in modern design, and with three Clamping T-slots in Y +-400/1400/1400 mm, also thread holes. The Machine is actually without the PC-Workstations and without Monitors

X Axis, approx. (longitudinal) 5.000 mm Y Axis, approx. (cross) 1.600 mm (3.200 mm) Z Axis, approx. (vertical) 2.100 mm Max. Speed of Measuring slides 150 mm/sek. Measuring table size (one piece) 5.700 x 2.900 mm Outside dimension of measuring table 5.700 x 2.950 mm Table thickness, approx. 420 mm Tabletop height above floor, approx. 650 mm Max. Load onto Measuring Plate 5.000 kg Weight of Plate/ total machine approx. 12 to/14 to Electrical Load 1 kW/400 V/50 Hz Outside Dimension if erected approx. 7650 x 5500 x 3560 mm