STANDARD TECHNICAL SPECS MAX FOLDABLE SHEET LENGTH: 10.49 ft (3220mm) MAX THICKNESS CAPACITY IN FULL LENGTH: 2mm, 0.078’” (14g) STEEL CLAMPING BEAM (Z AXIS) OPENING HEIGHT (NO TOOLS): 6.3 in (160.02 mm) CLAMPING SPEED: 2.36 in/sec FOLDING BEAM (Y AXIS) FOLDING ANGLE: 0 - 150° FOLDING SPEED: 65°/sec FOLDING BEAM ADJUSTMENT (A AXIS) ADJUSTMENT HEIGHT: 1.37” (35mm) ADJUSTMENT: Manual 1M BACK GAUGE SYSTEM (X AXIS) SPEED: 9.8 in/sec MIN/MAX GAUGING: 0.078” / 39.37” (2 mm / 1000mm) ROTATION OF THE CLAMPING BEAM (C AXIS) ROTATIONAL SPEED: 20°/sec -AC Motorized drive of X, Y, Z, C (Clamping, Folding, Back Gauge, Clamping Rotation) - Thanks to 180 ° rotating 2 station clamping beam, according to your part and programming, the beam can switch to desired station and make you easily do the deep/box bending or long/profile bendings at the same machine, just in seconds, without changing the tool set-up. -With its 6.29” stroke capacity, you can do box/pan bending up to 3.54” depth -Thanks to its brass and oil-free friction plates on the linear guides, you can work for years without any lubrication or maintenance - Protective bellows prevent dirt or dust from entering system increasing system longevity. BACK GAUGE AND SHEET SUPPORT TABLE (standard) -Standard back gauge system comes with: -1000 mm servo motorized back gauge arms – min gauge: 6 mm – max gauge:1000 mm -1000 mm long sheet support table with ball casters -Flat rail bottom beam with Feather Grooves. ERFOLD BASIC CNC LINE BY LINE CONTROLLER (Standard) -15.6 ‘’ touchscreen PC based controller on swivel arm - Line by line part programming by entering numerical values of the axes - Creating, saving, loading parts with different names, materials and sheet thicknesses - Open or drop hemming function - Multi radius bending function - 16 gb memory for unlimited receipt storage - Manual axis controls, alarm and error indications, machine detailed parameters Controller Erfold Basic CNC Line By Line Controller STANDARD SAFETY FEATURES -3-switch foot pedal with panic button function on two steps - (Step on left pedal = clamping beam goes up immediately) - (Step on middle pedal = folding beam and all axis stops immediately) Front light barriers: -For operator safety, front light barriers are located at the left and right front side of the machine, managed by safety plc and prevent unwanted interventions of body, foot or finger to avoid accidents especially during the working at the back side of the machine. LED function lights: -These lights Indicate machine status and the placement makes it easy to see from anywhere on the production floor. Light color codes; -Red – Emergency stop / error mode - Blue – Manual control/setup mode Manual Folding beam Adjustment A Axis (Standard) -Manual Adjustability: 1.37” (35mm) BEAM GEOMETRY AND TOOLING (Sharp Nose) -R1 or 20° sharp nose full length clamping beam tool -42CrMo4 grinded material -Folding beam tools -42CrMo4 grinded material – as 2 sets 0.39” (15mm) and 1” (25mm) widths BEAM GEOMETRY AND TOOLING ( GOATS FOOT) -3.54” (90mm) Sectionalized Goats Foot Tooling -42CrMo4 grinded material, nose part is 60 HRC laser surface hardened whole body is darkened against corrosion - Segmented between 0.78” – 19.6” lengths (3.93” x 2 pcs corner tools included) - Bottom beam tools: 42 CrMo4 grinded material