LNS ALPHA 538

The Alpha 538 - efficient and cost effective bar feeder The maximum productivity for feeding bars with diameters of 5 to 38 mm is ensured by this LNS Alpha 538 bar feeder. Therefore, it is especial...

LNS ALPHA 552

The Alpha 552 - efficient and cost effective bar feeder The LNS Alpha 552 bar feeder ensures the maximum productivity for feeding bars with diameters of 5 to 52 mm. Therfore, it is especially suite...

LNS GT 326-E

Automatic Magazine Bar Loader for sliding headstock lathes to run capacities listed below. Bar diameter capacity: 1/8” to .787” (3 mm to 20 mm) 1.02” max. (26 mm) with bar preparation Bar length: ...

LNS HYDROBAR

Manual Load Bar Feed for sliding or fixed headstock lathes 8 models available ranging in bar capacities from 1/16" to 2-5/8"

LNS HYS 3.12 HS-4.8

LNS HYS 3.20 HS-4.8

LNS HYS 6.32 HS-4.8

LNS HYS 6.38 HS-4.8

LNS HYS 6.42 HS-5.2

LNS HYS 6.52 HS-5.2

LNS HYS 6.65 HS -5.2

LNS HYS 6.68 HS-5.2

LNS QUICK LOAD SERVO 105

LNS QUICK LOAD SERVO 80 S2

Automatic Magazine Loader Used with fixed or traveling headstock lathes Capacity: Bar Diameter: ¼” to 3-1/8” Bar Length: 14” to 63” * *Not to exceed overall length of spindle

LNS QUICK LOAD SERVO S3+

The Quick Load Servo S3+ bar feeder reliably loads 1/4” to 4-3/4” diameter bar stock in lengths from 4” to 63” (not to exceed overall spindle length). Coupled with a fully automatic diameter adjust...

LNS TRYTON

Automatic Magazine Bar Loader 4 Models of Standard Barrel interchangeable barrels with up to 45 totally enclosed guide tubes provide hours of uninterrupted operation 2 Models of Combo Barrel 28 (2...